The mailing list for listmasters using Sympa

[Frisch Roswitha <address@concealed>]

Hello,


We try to use multiple robots on our listserver as described in your mail 
below, but it doesn't work ("canonicalise=off" we didn’t have in httpd.conf).
robot.conf seems not to be found by sympa.

We configured 2 domains in /etc/httpd/vhosts.d/*.conf.
Sympa-Home:
/var/sympa/

Creating directories for both domains in:
/var/sympa/list_data/
/var/sympa/etc/

In /var/sympa/etc/<domain1>/ the robot.conf is located.

But only that domain, which is in sympa.conf is shown in webinterface. For 
example, when in sympa.conf "Main robot hostname: domain list1.com" is 
configured, then we see only the lists with domain list1.com, equal using 
webinterface http://list1.com/sympa or http://list2.com/sympa.

Also we see always the title configured in wwsympa.conf (in robot.conf 
different one are configured).

What's wrong on our configuration?

Kind regards
Roswitha Frisch

-----Ursprüngliche Nachricht-----
Von: address@concealed 
[mailto:address@concealed] Im Auftrag von Steve Shipway
Gesendet: Mittwoch, 22. Januar 2014 03:53
An: Navid Hirad; address@concealed
Betreff: RE: [sympa-users] sympa virtual host config

We have multiple robots on our system, configured through the web interface.

To do this, we simply have the various robot domains in DNS as aliases for 
the host in question.  Wwsympa picks up the hostname you accessed it via and 
shows the web interface for the correct robot; you should have the 
appropriate URLs defined in the robot.conf files.

So, list.foo.com and list.bar.com are both A records for the same IP and as 
aliases for the server.  You have canonicalise=off in the httpd.conf.  When 
you use http://list.foo.com/sympa  you get the list.foo.com robot, and when 
you use http://list.bar.com/sympa you get the bar.com robot.

Steve Shipway
address@concealed


-----Original Message-----
From: address@concealed
[mailto:address@concealed] On Behalf Of 
address@concealed
Sent: Wednesday, 22 January 2014 6:10 a.m.
To: address@concealed
Subject: [sympa-users] sympa virtual host config

Hello,
I have some questions regarding manageing multiple domains.

first:
As we are migrating from version 3 to the newest versen 6. In the old version 
we were able to configure multiple lists (different domains) in one 
webinterface (wwsympa). In the new Version 6 I have found out that we have to 
use robots. Is this correct or is there any way how to manage multiple lists 
in different domains in one wwsympa installation without robots

Our Problem is that we only see that domain in webinterface which we have 
written in sympa.conf under "main robot hostname" is it possible to define 
more than one domain as main robot hostname or must we use robots.conf?

best regards
Hirad


*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*
T-Systems Austria GesmbH Rennweg 97-99, 1030 Wien
Handelsgericht Wien, FN 79340b
*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*
Notice: This e-mail contains information that is confidential and may be 
privileged.
If you are not the intended recipient, please notify the sender and then
delete this e-mail immediately.
*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*"*