devel - Re: [sympa-dev] Autotools cleanup

Subject: Developers of Sympa

List archive

Re: [sympa-dev] Autotools cleanup

From: Guillaume Rousse <address@concealed>
To: address@concealed
Subject: Re: [sympa-dev] Autotools cleanup
Date: Mon, 03 Mar 2008 22:11:00 +0100

Guillaume Rousse a écrit :
> Here is a fixed subset of previous patch, dealing with doc directory
> only.
And the corresponding one for the src subdirectory is way too complex to
be understandable...

BTW, is there any interest for this work ? Given the amount received
sofar, I'm a bit skeptic. I should have begun with the list of problems
with current sympa installation procedure:
- the result is not FHS compatible (/home is not a software installation
prefix)
- the configure scripts ignore standard directories switches (--bindir,
--datadir, etc...) and duplicates them as non-standard switches instead
(--with-bindir, --with-datadir, etc...)
- the configure scripts ask for variables, such as openssl location,
which are absolutly useless for installation itself
- the 'install' makefile target doesn't support DESTDIR= option during
installation
- the 'install' makefile target is not usable by a normal user, due to
the usage of chown/chgrp commands
- checks are mixed between the './configure' and 'make' steps (perl modules)
- distributed archive contains generated files (man pages, i86
executables, autoconf cache files, etc...)

As a consequence, building and installing sympa in a FHS-compatible
manner is difficult, especially for package maintainers who have to
patch the installation scripts a lot.

All of those problems could be fixed by using autotools correctly, as
they have been designed precisely for this purpose. However, the large
amount of legacy cruft in makefiles make it quite difficult to produce
small incremental patches, while keeping the whole software installation
functionning.

Here is a different collection of incremental patches, applied against
current svn trunk. Most are purely cosmetics, excepted patches 4 and 5
by changing installation directories.

I'd like some developper input to know if it's worth continuing this effort.
--
Guillaume Rousse
Moyens Informatiques - INRIA Futurs
Tel: 01 69 35 69 62
diff -Naur trunk/aclocal.m4 trunk-1/aclocal.m4
--- trunk/aclocal.m4 2008-03-03 20:53:58.000000000 +0100
+++ trunk-1/aclocal.m4 1970-01-01 01:00:00.000000000 +0100
@@ -1,879 +0,0 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.6])])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*$.*$"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ(2.52)dnl
- ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "GCJ", or "OBJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
- [$1], CXX, [depcc="$CXX" am_compiler_list=],
- [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*$[a-zA-Z0-9]*$)$/\1/p'] < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c
\
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument
required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE(dependency-tracking,
-[ --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-#serial 3
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each `.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean"
there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES(CC)],
- [define([AC_PROG_CC],
- defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES(CXX)],
- [define([AC_PROG_CXX],
- defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $1 | $1:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
-# From Jim Meyering
-
-# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-AC_DEFUN([AM_MAINTAINER_MODE],
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of
Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- USE_MAINTAINER_MODE=$enableval,
- USE_MAINTAINER_MODE=no)
- AC_MSG_RESULT([$USE_MAINTAINER_MODE])
- AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST(MAINT)dnl
-]
-)
-
-AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" =
"done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME. Presently that only means defining a flag for this
option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
- [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
- [m4_case([$1], [ustar],, [pax],,
- [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar;
- do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf -
"'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf -
"'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
diff -Naur trunk/config.guess trunk-1/config.guess
--- trunk/config.guess 2008-03-03 20:53:58.000000000 +0100
+++ trunk-1/config.guess 1970-01-01 01:00:00.000000000 +0100
@@ -1,1317 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-
-timestamp='2001-09-04'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Written by Per Bothner <address@concealed>.
-# Please send patches to <address@concealed>.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <address@concealed>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-
-dummy=dummy-$$
-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script.
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int dummy(){}" > $dummy.c ;
- for c in cc gcc c89 ; do
- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
- if test $? = 0 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- rm -f $dummy.c $dummy.o $dummy.rel ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (address@concealed 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # Netbsd (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- # Determine the machine/vendor (is the vendor relevant).
- case "${UNAME_MACHINE}" in
- amiga) machine=m68k-unknown ;;
- arm32) machine=arm-unknown ;;
- atari*) machine=m68k-atari ;;
- sun3*) machine=m68k-sun ;;
- mac68k) machine=m68k-apple ;;
- macppc) machine=powerpc-apple ;;
- hp3[0-9][05]) machine=m68k-hp ;;
- ibmrt|romp-ibm) machine=romp-ibm ;;
- *) machine=${UNAME_MACHINE}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE}" in
-
i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out
(netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- cat <<EOF >$dummy.s
- .data
-\$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-
- .text
- .globl main
- .align 4
- .ent main
-main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
- .end main
-EOF
- eval $set_cc_for_build
- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- case `./$dummy` in
- 0-0)
- UNAME_MACHINE="alpha"
- ;;
- 1-0)
- UNAME_MACHINE="alphaev5"
- ;;
- 1-1)
- UNAME_MACHINE="alphaev56"
- ;;
- 1-101)
- UNAME_MACHINE="alphapca56"
- ;;
- 2-303)
- UNAME_MACHINE="alphaev6"
- ;;
- 2-307)
- UNAME_MACHINE="alphaev67"
- ;;
- 2-1307)
- UNAME_MACHINE="alphaev68"
- ;;
- esac
- fi
- rm -f $dummy.s $dummy
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e
's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit 0;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
- arc64:OpenBSD:*:*)
- echo mips64el-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hkmips:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mips-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # address@concealed (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}')
2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- sparc*:NetBSD:*)
- echo `uname -p`-unknown-netbsd${UNAME_RELEASE}
- exit 0 ;;
- atari*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
- sun3*:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy \
- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n
's/$[0-9]*$.*/\1/p'` \
- && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f
$dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 |
awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null
2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- case "${HPUX_REV}" in
- 11.[0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION
2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS
2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- esac ;;
- esac
- fi ;;
- esac
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) &&
HP_ARCH=`./$dummy`
- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
- rm -f $dummy.c $dummy
- fi ;;
- esac
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2");
break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2");
break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2");
break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy
&& exit 0
- rm -f $dummy.c $dummy
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- hppa*:OpenBSD:*:*)
- echo hppa-unknown-openbsd
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*X-MP:*:*:*)
- echo xmp-cray-unicos
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*$[A-Z]90$/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3D:*:*:*)
- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY-2:*:*:*)
- echo cray2-cray-unicos
- exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'
'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e
's/[-(].*//'`
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e
's/[-_].*/\./'`
- exit 0 ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i386-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e
's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo
${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
- case `sed -n '/^byte/s/^.*: $.*$ endian/\1/p' < /proc/cpuinfo` in
- big) echo mips-unknown-linux-gnu && exit 0 ;;
- little) echo mipsel-unknown-linux-gnu && exit 0 ;;
- esac
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: $.*$/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2`
in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- ld_supported_targets=`cd /; ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- cat >$dummy.c <<EOF
-#include <features.h>
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __ELF__
-# ifdef __GLIBC__
-# if __GLIBC__ >= 2
- printf ("%s-pc-linux-gnu\n", argv[1]);
-# else
- printf ("%s-pc-linux-gnulibc1\n", argv[1]);
-# endif
-# else
- printf ("%s-pc-linux-gnulibc1\n", argv[1]);
-# endif
-#else
- printf ("%s-pc-linux-gnuaout\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy
"${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit 0 ;;
- i*86:*:5:[78]*)
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo
${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 |
4850:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* $[0-9][0-9]$.*/\1/p' <
/etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <address@concealed>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <address@concealed>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From address@concealed.
- echo i860-stratus-sysv4
- exit 0 ;;
- *:VOS:*:*)
- # From address@concealed.
- echo hppa1.1-stratus-vos
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit 0 ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit 0 ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit 0 ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit 0 ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
- echo `uname -p`-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- if test "${UNAME_MACHINE}" = "x86pc"; then
- UNAME_MACHINE=pc
- fi
- echo `uname -p`-${UNAME_MACHINE}-nto-qnx
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
- NSR-[KW]:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit 0 ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit 0 ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit 0 ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit 0 ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit 0 ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit 0 ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}"
1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach $[0-9]*$.*/\1/p')
2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c
$dummy && exit 0
-rm -f $dummy.c $dummy
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <address@concealed> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff -Naur trunk/config.sub trunk-1/config.sub
--- trunk/config.sub 2008-03-03 20:53:58.000000000 +0100
+++ trunk-1/config.sub 1970-01-01 01:00:00.000000000 +0100
@@ -1,1411 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
-
-timestamp='2001-09-07'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Please send patches to <address@concealed>.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <address@concealed>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit 0;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^$.*$-$[^-]*-[^-]*$$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* |
\
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
- | c4x | clipper \
- | d10v | d30v | dsp16xx \
- | fr30 \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | m32r | m68000 | m68k | m88k | mcore \
- | mips16 | mips64 | mips64el | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el | mips64vr4300 \
- | mips64vr4300el | mips64vr5000 | mips64vr5000el \
- | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
- | mipsisa32 \
- | mn10200 | mn10300 \
- | ns16k | ns32k \
- | openrisc \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | s390 | s390x \
- | sh | sh[34] | sh[34]eb | shbe | shle \
- | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
- | stormy16 | strongarm \
- | tahoe | thumb | tic80 | tron \
- | v850 \
- | we32k \
- | x86 | xscale \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\'
not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alphapca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armv*-* \
- | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c54x-* \
- | clipper-* | cray2-* | cydra-* \
- | d10v-* | d30v-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | m32r-* \
- | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
- | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
- | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
- | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | s390-* | s390x-* \
- | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \
- | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
- | v850-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \
- | ymp-* \
- | z8k-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- cray2)
- basic_machine=cray2-cray
- os=-unicos
- ;;
- [cjt]90)
- basic_machine=${basic_machine}-cray
- os=-unicos
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 |
decstatn)
- basic_machine=mips-dec
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9
| hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mipsel*-linux*)
- basic_machine=mipsel-unknown
- os=-linux-gnu
- ;;
- mips*-linux*)
- basic_machine=mips-unknown
- os=-linux-gnu
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e
's/mips3/mips64/'`-unknown
- ;;
- mmix*)
- basic_machine=mmix-knuth
- os=-mmixware
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pentium | p5 | k5 | k6 | nexgen)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2)
- basic_machine=i686-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed
's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed
's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed
's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed
's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sparclite-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=t3e-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- windows32)
- basic_machine=i386-pc
- os=-windows32-msvcrt
- ;;
- xmp)
- basic_machine=xmp-cray
- os=-unicos
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- mips)
- if [ x$os = x-linux-gnu ]; then
- basic_machine=mips-unknown
- else
- basic_machine=mips-mips
- fi
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh3 | sh4 | sh3eb | sh4eb)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv9 | sparcv9b)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- c4x*)
- basic_machine=c4x-none
- os=-coff
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\'
not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos |
-sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym*
\
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* |
-aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* |
-riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* |
-oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto*)
- os=-nto-qnx
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not
recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various
machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-ibm)
- os=-aix
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -vxsim* | -vxworks*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff -Naur trunk/configure trunk-1/configure
--- trunk/configure 2008-03-03 20:53:58.000000000 +0100
+++ trunk-1/configure 1970-01-01 01:00:00.000000000 +0100
@@ -1,5117 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59.
-#
-# Copyright (C) 2003 Free Software Foundation, Inc.
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '$a$' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \
- X"$0" : 'X$//$$' \| \
- X"$0" : 'X$/$$' \| \
- . : '$.$' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; }
- /^X\/$\/\/$$/{ s//\1/; q; }
- /^X\/$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { echo "$as_me: error: cannot find myself; rerun with an absolute path"
>&2
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || {
BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV;
}
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
-
s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '$a$' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-exec 6>&1
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_config_libobj_dir=.
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete. It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-
-ac_unique_file="check_perl_modules.pl"
-ac_default_prefix=/home/sympa
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME
PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix
program_transform_name bindir sbindir libexecdir datadir sysconfdir
sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir
build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS
MAJOR_VERSION MINOR_VERSION MICRO_VERSION build build_cpu build_vendor
build_os host host_cpu host_vendor host_os target target_cpu target_vendor
target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE
VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP
ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR
am__tar am__untar CONFDIR CGIDIR BINDIR SBINDIR LIBEXECDIR LIBDIR DATADIR
EXPLDIR MANDIR INITDIR LOCKDIR PIDDIR ETCDIR LOCALEDIR DOCDIR SCRIPTDIR
SAMPLEDIR SPOOLDIR enable_secure CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT
OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH
CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP EGREP PERL SUIDPERL SUDO
MHONARC OPENSSL CVS2CL MSGFMT SH USER GROUP SENDMAIL_ALIASES VIRTUAL_ALIASES
NEWALIASES NEWALIASES_ARG POSTMAP POSTMAP_ARG MAINTAINER_MODE_TRUE
MAINTAINER_MODE_FALSE MAINT LIBOBJS LTLIBOBJS'
-ac_subst_files=''
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
-
-ac_prev=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval "$ac_prev=\$ac_option"
- ac_prev=
- continue
- fi
-
- ac_optarg=`expr "x$ac_option" : 'x[^=]*=$.*$'`
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_option in
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* |
--c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
- | --da=*)
- datadir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_feature=`expr "x$ac_option" : 'x-*disable-$.*$'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- eval "enable_$ac_feature=no" ;;
-
- -enable-* | --enable-*)
- ac_feature=`expr "x$ac_option" : 'x-*enable-$[^=]*$'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid feature name: $ac_feature" >&2
- { (exit 1); exit 1; }; }
- ac_feature=`echo $ac_feature | sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "enable_$ac_feature='$ac_optarg'" ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* |
--include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* |
--libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst \
- | --locals | --local | --loca | --loc | --lo)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* \
- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=*
\
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* |
--sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_package=`expr "x$ac_option" : 'x-*with-$[^=]*$'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package| sed 's/-/_/g'`
- case $ac_option in
- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
- *) ac_optarg=yes ;;
- esac
- eval "with_$ac_package='$ac_optarg'" ;;
-
- -without-* | --without-*)
- ac_package=`expr "x$ac_option" : 'x-*without-$.*$'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid package name: $ac_package" >&2
- { (exit 1); exit 1; }; }
- ac_package=`echo $ac_package | sed 's/-/_/g'`
- eval "with_$ac_package=no" ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* |
--x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) { echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
- { (exit 1); exit 1; }; }
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x$[^=]*$='`
- # Reject names that are not valid shell variable names.
- expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
- { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
- { (exit 1); exit 1; }; }
- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
- eval "$ac_envvar='$ac_optarg'"
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option}
${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- { echo "$as_me: error: missing argument to $ac_option" >&2
- { (exit 1); exit 1; }; }
-fi
-
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
- localstatedir libdir includedir oldincludedir infodir mandir
-do
- eval ac_val=$`echo $ac_var`
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) ;;
- *) { echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- echo "$as_me: WARNING: If you wanted to set the --build type, don't use
--host.
- If a cross compiler is detected then cross compile mode will be used."
>&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then its parent.
- ac_confdir=`(dirname "$0") 2>/dev/null ||
-$as_expr X"$0" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$0" : 'X$//$[^/]' \| \
- X"$0" : 'X$//$$' \| \
- X"$0" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$0" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r $srcdir/$ac_unique_file; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r $srcdir/$ac_unique_file; then
- if test "$ac_srcdir_defaulted" = yes; then
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in
$ac_confdir or .." >&2
- { (exit 1); exit 1; }; }
- else
- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir"
>&2
- { (exit 1); exit 1; }; }
- fi
-fi
-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not
work" >&2
- { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%$[^\\/]$[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-_ACEOF
-
- cat <<_ACEOF
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --datadir=DIR read-only architecture-independent data
[PREFIX/share]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data
[PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --infodir=DIR info documentation [PREFIX/info]
- --mandir=DIR man documentation [PREFIX/man]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program
names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program
names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
- --target=TARGET configure for building compilers for TARGET [HOST]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
- cat <<\_ACEOF
-
-Optional Features:
- --disable-FEATURE do not include FEATURE (same as
--enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-secure install wwsympa to be run in a secure mode, without
suidperl (default disabled)
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
- --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-confdir=DIR Sympa main configuration files in DIR (default
/etc)
- --with-cgidir=DIR CGIs in DIR (default ${prefix}/bin)
- --with-bindir=DIR user executables in DIR (default ${prefix}/bin).
queue and bouncequeue programs will be installed in this directory. If
sendmail is configured to use smrsh (check the mailer prog definition in your
sendmail.cf), this should point to /etc/smrsh. This is probably the case if
you are using Linux
- --with-sbindir=DIR system admin executables in DIR (default
${prefix}/bin)
- --with-libexecdir=DIR program executables in DIR (default
${prefix}/bin)
- --with-libdir=DIR Perl modules in DIR (default ${prefix}/bin)
- --with-datadir=DIR default *read-only* data files in DIR (default
${prefix}/bin/etc)
- --with-expldir=DIR modifiable data files in DIR (default
${prefix}/expl)
- --with-mandir=DIR documentation in DIR (default /usr/local/man)
- --with-initdir=DIR install System V init script in DIR (default
/etc/rc.d/init.d)
- --with-lockdir=DIR create lock files in DIR (default /var/lock/subsys)
- --with-piddir=DIR create .pid files in DIR (default ${prefix})
- --with-etcdir=DIR Config directories populated by the user are in DIR
(default ${prefix}/etc)
- --with-localedir=DIR create language files in DIR (default
${prefix}/locale)
- --with-docdir=DIR create documentation files in DIR (default
${prefix}/doc)
- --with-scriptdir=DIR create script files in DIR (default
${prefix}/bin)
- --with-sampledir=DIR create sample files in DIR (default
${prefix}/sample)
- --with-spooldir=DIR spool directory is DIR (default ${prefix}/spool)
- --with-perl=FULLPATH set full path to Perl interpreter (default
/usr/bin/perl)
- --with-mhonarc=FULLPATH set full path to MhOnArc mail archiving
system (default /usr/bin/mhonarc)
- --with-openssl=FULLPATH set path to OpenSSL (default
/usr/local/ssl/bin/openssl)
- --with-user=LOGIN set sympa user name (default sympa)
- --with-group=LOGIN set sympa group name (default sympa)
- --with-sendmail_aliases=ALIASFILE set aliases file to be used by Sympa
(default /etc/mail/sympa_aliases)
- --with-virtual_aliases=ALIASFILE set postfix virtual file to be used
by Sympa (default /etc/mail/sympa_virtual)
- --with-newaliases=FULLPATH set path to newaliases command (default
/usr/bin/newaliases)
- --with-newaliases_arg=ARGS set arguments to newaliases command
(default NONE)
- --with-postmap=FULLPATH set path to postfix postmap command (default
/usr/sbin/postmap)
- --with-postmap_arg=ARGS set arguments to postfix postmap command
(default same as virtual_aliases)
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
- headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-_ACEOF
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- ac_popdir=`pwd`
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d $ac_dir || continue
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
- cd $ac_dir
- # Check for guested configure; otherwise get Cygnus style configure.
- if test -f $ac_srcdir/configure.gnu; then
- echo
- $SHELL $ac_srcdir/configure.gnu --help=recursive
- elif test -f $ac_srcdir/configure; then
- echo
- $SHELL $ac_srcdir/configure --help=recursive
- elif test -f $ac_srcdir/configure.ac ||
- test -f $ac_srcdir/configure.in; then
- echo
- $ac_configure --help
- else
- echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi
- cd $ac_popdir
- done
-fi
-
-test -n "$ac_init_help" && exit 0
-if $ac_init_version; then
- cat <<\_ACEOF
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit 0
-fi
-exec 5>config.log
-cat >&5 <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo
unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo
unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo
unknown`
-hostinfo = `(hostinfo) 2>/dev/null || echo
unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo
unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo
unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo
unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- echo "PATH: $as_dir"
-done
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_sep=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
- 2)
- ac_configure_args1="$ac_configure_args1 '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
- # Get rid of the leading space.
- ac_sep=" "
- ;;
- esac
- done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || {
ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || {
ac_configure_args1=; export ac_configure_args1; }
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-{
- (set) 2>&1 |
- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- sed -n \
- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-
s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='"'"'\\2'"'"'/p"
- ;;
- *)
- sed -n \
- "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p"
- ;;
- esac;
-}
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=$`echo $ac_var`
- echo "$ac_var='"'"'$ac_val'"'"'"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- sed "/^$/d" confdefs.h | sort
- echo
- fi
- test "$ac_signal" != 0 &&
- echo "$as_me: caught signal $ac_signal"
- echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core &&
- rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
- ' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a
newline.
-echo >confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site
$ac_default_prefix/etc/config.site"
- fi
-fi
-for ac_site_file in $CONFIG_SITE; do
- if test -r "$ac_site_file"; then
- { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { echo "$as_me:$LINENO: loading cache $cache_file" >&5
-echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . $cache_file;;
- *) . ./$cache_file;;
- esac
- fi
-else
- { echo "$as_me:$LINENO: creating cache $cache_file" >&5
-echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
- sed -n 's/^ac_env_$[a-zA-Z_0-9]*$_set=.*/\1/p'`; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val="\$ac_cv_env_${ac_var}_value"
- eval ac_new_val="\$ac_env_${ac_var}_value"
- case $ac_old_set,$ac_new_set in
- set,)
- { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in
the previous run" >&5
-echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous
run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous
run" >&5
-echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the
previous run:" >&5
-echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
-echo "$as_me: former value: $ac_old_val" >&2;}
- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
-echo "$as_me: current value: $ac_new_val" >&2;}
- ac_cache_corrupted=:
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\{\}\\\|\;\<\>\?\"\']*)
- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { echo "$as_me:$LINENO: error: changes in the environment can compromise
the build" >&5
-echo "$as_me: error: changes in the environment can compromise the build"
>&2;}
- { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm
$cache_file' and start over" >&5
-echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and
start over" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-PACKAGE=sympa
-VERSION=`cat ${srcdir}/.version`
-MAJOR_VERSION=`expr $VERSION : '$[0-9][0-9]*$'`
-
-MINOR_VERSION=`expr $VERSION : '[0-9][0-9]*\.$[0-9][0-9]*$'`
-
-MICRO_VERSION=`expr $VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.$[0-9][0-9]*$'`
-
-ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f $ac_dir/shtool; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in
$srcdir $srcdir/.. $srcdir/../.." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir
$srcdir/.. $srcdir/../.." >&2;}
- { (exit 1); exit 1; }; }
-fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus
configure.
-
-# Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
- { (exit 1); exit 1; }; }
-
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
-if test "${ac_cv_build+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
- ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
- { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify
one" >&5
-echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
- { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed"
>&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
-build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'`
-
-
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
-if test "${ac_cv_host+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
- ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed"
>&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
-host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'`
-
-
-echo "$as_me:$LINENO: checking target system type" >&5
-echo $ECHO_N "checking target system type... $ECHO_C" >&6
-if test "${ac_cv_target+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_target_alias=$target_alias
-test "x$ac_cv_target_alias" = "x" &&
- ac_cv_target_alias=$ac_cv_host_alias
-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias
failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
- { (exit 1); exit 1; }; }
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_target" >&5
-echo "${ECHO_T}$ac_cv_target" >&6
-target=$ac_cv_target
-target_cpu=`echo $ac_cv_target | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\1/'`
-target_vendor=`echo $ac_cv_target | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\2/'`
-target_os=`echo $ac_cv_target | sed 's/^$[^-]*$-$[^-]*$-$.*$$/\3/'`
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-am__api_version="1.9"
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
- ./ | .// | /cC/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- done
- done
- ;;
-esac
-done
-
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. We don't cache a
- # path for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the path is relative.
- INSTALL=$ac_install_sh
- fi
-fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure
there is not a broken
-alias in your environment" >&5
-echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
-alias in your environment" >&2;}
- { (exit 1); exit 1; }; }
- fi
-
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- { { echo "$as_me:$LINENO: error: newly created file is older than
distributed files!
-Check your system clock" >&5
-echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
- { (exit 1); exit 1; }; }
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-test "$program_prefix" != NONE &&
- program_transform_name="s,^,$program_prefix,;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s,\$,$program_suffix,;$program_transform_name"
-# Double any \ or $. echo might interpret backslashes.
-# By default was `s,x,x', remove it if useless.
-cat <<\_ACEOF >conftest.sed
-s/[\\$]/&&/g;s/;s,x,x,$//
-_ACEOF
-program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing"
>&5
-echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
-fi
-
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with
args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$AWK" && break
-done
-
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-all:
- @echo 'ac_maketemp="$(MAKE)"'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- SET_MAKE=
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run
\"make distclean\" there first" >&5
-echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE=sympa
- VERSION=$VERSION
-
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a
program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- STRIP=$ac_ct_STRIP
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
-
-
-
-
-
-
-
-
-
-## Directories setup
-## for main config files
-
-## location of main config files
-CONFDIR='/etc'
-
-# Check whether --with-confdir or --without-confdir was given.
-if test "${with_confdir+set}" = set; then
- withval="$with_confdir"
- CONFDIR="$withval"
-fi;
-
-
-## location of CGIs
-CGIDIR='${prefix}/bin'
-
-# Check whether --with-cgidir or --without-cgidir was given.
-if test "${with_cgidir+set}" = set; then
- withval="$with_cgidir"
- CGIDIR="$withval"
-fi;
-
-
-## location of user executables
-BINDIR='${prefix}/bin'
-
-# Check whether --with-bindir or --without-bindir was given.
-if test "${with_bindir+set}" = set; then
- withval="$with_bindir"
- BINDIR="$withval"
-fi;
-
-
-## location of system admin executables
-SBINDIR='${prefix}/bin'
-
-# Check whether --with-sbindir or --without-sbindir was given.
-if test "${with_sbindir+set}" = set; then
- withval="$with_sbindir"
- SBINDIR="$withval"
-fi;
-
-
-## location of program executables
-LIBEXECDIR='${prefix}/bin'
-
-# Check whether --with-libexecdir or --without-libexecdir was given.
-if test "${with_libexecdir+set}" = set; then
- withval="$with_libexecdir"
- LIBEXECDIR="$withval"
-fi;
-
-
-## location of Perl modules
-LIBDIR='${prefix}/bin'
-
-# Check whether --with-libdir or --without-libdir was given.
-if test "${with_libdir+set}" = set; then
- withval="$with_libdir"
- LIBDIR="$withval"
-fi;
-
-
-## location of default *read-only* data files
-DATADIR='${prefix}/bin/etc'
-
-# Check whether --with-datadir or --without-datadir was given.
-if test "${with_datadir+set}" = set; then
- withval="$with_datadir"
- DATADIR="$withval"
-fi;
-
-
-## location of modifiable data files
-EXPLDIR='${prefix}/expl'
-
-# Check whether --with-expldir or --without-expldir was given.
-if test "${with_expldir+set}" = set; then
- withval="$with_expldir"
- EXPLDIR="$withval"
-fi;
-
-
-## location of documentation
-MANDIR='/usr/local/man'
-
-# Check whether --with-mandir or --without-mandir was given.
-if test "${with_mandir+set}" = set; then
- withval="$with_mandir"
- MANDIR="$withval"
-fi;
-
-
-## SYS V init scripts directory
-INITDIR=/etc/rc.d/init.d
-
-# Check whether --with-initdir or --without-initdir was given.
-if test "${with_initdir+set}" = set; then
- withval="$with_initdir"
- INITDIR="$withval"
-fi;
-
-
-## Lock directory
-LOCKDIR=/var/lock/subsys
-
-# Check whether --with-lockdir or --without-lockdir was given.
-if test "${with_lockdir+set}" = set; then
- withval="$with_lockdir"
- LOCKDIR="$withval"
-fi;
-
-
-## directory for storing .pid files
-PIDDIR='${prefix}'
-
-# Check whether --with-piddir or --without-piddir was given.
-if test "${with_piddir+set}" = set; then
- withval="$with_piddir"
- PIDDIR="$withval"
-fi;
-
-
-## directory for Config directories populated by the user
-ETCDIR='${prefix}/etc'
-
-# Check whether --with-etcdir or --without-etcdir was given.
-if test "${with_etcdir+set}" = set; then
- withval="$with_etcdir"
- ETCDIR="$withval"
-fi;
-
-
-## directory for language files
-LOCALEDIR='${prefix}/locale'
-
-# Check whether --with-localedir or --without-localedir was given.
-if test "${with_localedir+set}" = set; then
- withval="$with_localedir"
- LOCALEDIR="$withval"
-fi;
-
-
-## directory for Documentation files
-DOCDIR='${prefix}/doc'
-
-# Check whether --with-docdir or --without-docdir was given.
-if test "${with_docdir+set}" = set; then
- withval="$with_docdir"
- DOCDIR="$withval"
-fi;
-
-
-## directory for script files
-SCRIPTDIR='${prefix}/bin'
-
-# Check whether --with-scriptdir or --without-scriptdir was given.
-if test "${with_scriptdir+set}" = set; then
- withval="$with_scriptdir"
- SCRIPTDIR="$withval"
-fi;
-
-
-## directory for sample files
-SAMPLEDIR='${prefix}/sample'
-
-# Check whether --with-sampledir or --without-sampledir was given.
-if test "${with_sampledir+set}" = set; then
- withval="$with_sampledir"
- SAMPLEDIR="$withval"
-fi;
-
-
-## directory for sample files
-SPOOLDIR='${prefix}/spool'
-
-# Check whether --with-spooldir or --without-spooldir was given.
-if test "${with_spooldir+set}" = set; then
- withval="$with_spooldir"
- SPOOLDIR="$withval"
-fi;
-
-
-## to run wwsympa.fcgi without setuidperl
-# Check whether --enable-secure or --disable-secure was given.
-if test "${enable_secure+set}" = set; then
- enableval="$enable_secure"
-
-fi;
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program
name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program
name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- CC=$ac_ct_CC
-else
- CC="$ac_cv_prog_CC"
-fi
-
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a
program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl
-do
- # Extract the first word of "$ac_prog", so it can be a program name with
args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$ac_ct_CC" && break
-done
-
- CC=$ac_ct_CC
-fi
-
-fi
-
-
-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler
found in \$PATH
-See \`config.log' for more details." >&5
-echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-
-# Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
- "checking for C compiler version" >&5
-ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
- (eval $ac_compiler --version </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
- (eval $ac_compiler -v </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
- (eval $ac_compiler -V </dev/null >&5) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }
-
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C"
>&6
-ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
- (eval $ac_link_default) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # Find the output, starting from the most likely. This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.*
b.out
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o
| *.obj )
- ;;
- conftest.$ac_ext )
- # This is the source file.
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'`
- # FIXME: I believe we export ac_cv_exeext for Libtool,
- # but it would be cool to find out if it's true. Does anybody
- # maintain Libtool? --akim.
- export ac_cv_exeext
- break;;
- * )
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
- { (exit 77); exit 77; }; }
-fi
-
-ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
-
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
- fi
- fi
-fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-
-rm -f a.out a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o
| *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*$\..*$'`
- export ac_cv_exeext
- break;;
- * ) break;;
- esac
-done
-else
- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables:
cannot compile and link
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of executables: cannot compile
and link
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
-if test "${ac_cv_objext+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; then
- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`;
do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.$.*$'`
- break;;
- esac
-done
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files:
cannot compile
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C"
>&6
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_compiler_gnu=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_compiler_gnu=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
-GCC=`test $ac_compiler_gnu = yes && echo yes`
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_g+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_g=yes
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-ac_cv_prog_cc_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_cv_prog_cc_stdc=no
-ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std1 is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std1. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int),
int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX -qlanglvl=ansi
-# Ultrix and OSF/1 -std1
-# HP-UX 10.20 and later -Ae
-# HP-UX older versions -Aa -D_HPUX_SOURCE
-# SVR4 -Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc
-D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- ac_cv_prog_cc_stdc=$ac_arg
-break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext
-done
-rm -f conftest.$ac_ext conftest.$ac_objext
-CC=$ac_save_CC
-
-fi
-
-case "x$ac_cv_prog_cc_stdc" in
- x|xno)
- echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
- *)
- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
- CC="$CC $ac_cv_prog_cc_stdc" ;;
-esac
-
-# Some people use a C++ compiler to compile C. Since we use `exit',
-# in C++ we need to declare it. In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
- choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- for ac_declaration in \
- '' \
- 'extern "C" void std::exit (int) throw (); using std::exit;' \
- 'extern "C" void std::exit (int); using std::exit;' \
- 'extern "C" void exit (int) throw ();' \
- 'extern "C" void exit (int);' \
- 'void exit (int);'
-do
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-$ac_declaration
-int
-main ()
-{
-exit (42);
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
- (eval $ac_compile) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } &&
- { ac_try='test -z "$ac_c_werror_flag"
- || test ! -s conftest.err'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; } &&
- { ac_try='test -s conftest.$ac_objext'
- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); }; }; then
- break
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
- echo '#ifdef __cplusplus' >>confdefs.h
- echo $ac_declaration >>confdefs.h
- echo '#endif' >>confdefs.h
-fi
-
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-DEPDIR="${am__leading_dot}deps"
-
- ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo done
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" =
"done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote="\""
- _am_result=BSD
- fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking or
--disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-
-
-depcc="$CC" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*$[a-zA-Z0-9]*$)$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c
\
- >/dev/null 2>conftest.err &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument
required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-
-if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.make <<\_ACEOF
-all:
- @echo 'ac_maketemp="$(MAKE)"'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
- eval ac_cv_prog_make_${ac_make}_set=yes
-else
- eval ac_cv_prog_make_${ac_make}_set=no
-fi
-rm -f conftest.make
-fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
- SET_MAKE=
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- :
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether non-existent headers
- # can be detected and how.
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
- ac_status=$?
- grep -v '^ *+' conftest.er1 >conftest.err
- rm -f conftest.er1
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- (exit $ac_status); } >/dev/null; then
- if test -s conftest.err; then
- ac_cpp_err=$ac_c_preproc_warn_flag
- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
- else
- ac_cpp_err=
- fi
-else
- ac_cpp_err=yes
-fi
-if test -z "$ac_cpp_err"; then
- # Broken: success on invalid input.
-continue
-else
- echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
- :
-else
- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS
conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
-
-
-
-echo "$as_me:$LINENO: checking for AIX" >&5
-echo $ECHO_N "checking for AIX... $ECHO_C" >&6
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef _AIX
- yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then
- echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
-cat >>confdefs.h <<\_ACEOF
-#define _ALL_SOURCE 1
-_ACEOF
-
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-rm -f conftest*
-
-
-
-# Extract the first word of "perl", so it can be a program name with args.
-set dummy perl; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_PERL+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $PERL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_PERL" && ac_cv_path_PERL="/usr/bin/perl"
- ;;
-esac
-fi
-PERL=$ac_cv_path_PERL
-
-if test -n "$PERL"; then
- echo "$as_me:$LINENO: result: $PERL" >&5
-echo "${ECHO_T}$PERL" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# Check whether --with-perl or --without-perl was given.
-if test "${with_perl+set}" = set; then
- withval="$with_perl"
- PERL="$withval"
-fi;
-
-
-# Extract the first word of "suidperl", so it can be a program name with
args.
-set dummy suidperl; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_SUIDPERL+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $SUIDPERL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SUIDPERL="$SUIDPERL" # Let the user override the test with a
path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SUIDPERL="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_SUIDPERL" && ac_cv_path_SUIDPERL="/usr/bin/suidperl"
- ;;
-esac
-fi
-SUIDPERL=$ac_cv_path_SUIDPERL
-
-if test -n "$SUIDPERL"; then
- echo "$as_me:$LINENO: result: $SUIDPERL" >&5
-echo "${ECHO_T}$SUIDPERL" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-
-# Extract the first word of "sudo", so it can be a program name with args.
-set dummy sudo; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_SUDO+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $SUDO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SUDO="$SUDO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SUDO="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_SUDO" && ac_cv_path_SUDO="/usr/bin/sudo"
- ;;
-esac
-fi
-SUDO=$ac_cv_path_SUDO
-
-if test -n "$SUDO"; then
- echo "$as_me:$LINENO: result: $SUDO" >&5
-echo "${ECHO_T}$SUDO" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-
-# Extract the first word of "mhonarc", so it can be a program name with args.
-set dummy mhonarc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_MHONARC+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MHONARC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MHONARC="$MHONARC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MHONARC="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_MHONARC" && ac_cv_path_MHONARC="/usr/bin/mhonarc"
- ;;
-esac
-fi
-MHONARC=$ac_cv_path_MHONARC
-
-if test -n "$MHONARC"; then
- echo "$as_me:$LINENO: result: $MHONARC" >&5
-echo "${ECHO_T}$MHONARC" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# Check whether --with-mhonarc or --without-mhonarc was given.
-if test "${with_mhonarc+set}" = set; then
- withval="$with_mhonarc"
- MHONARC="$withval"
-fi;
-
-
-# Extract the first word of "openssl", so it can be a program name with args.
-set dummy openssl; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_OPENSSL+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $OPENSSL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OPENSSL="$OPENSSL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OPENSSL="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_OPENSSL" && ac_cv_path_OPENSSL="/usr/local/ssl/bin"
- ;;
-esac
-fi
-OPENSSL=$ac_cv_path_OPENSSL
-
-if test -n "$OPENSSL"; then
- echo "$as_me:$LINENO: result: $OPENSSL" >&5
-echo "${ECHO_T}$OPENSSL" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-# Check whether --with-openssl or --without-openssl was given.
-if test "${with_openssl+set}" = set; then
- withval="$with_openssl"
- OPENSSL="$withval"
-fi;
-
-
-# Extract the first word of "cvs2cl.pl", so it can be a program name with
args.
-set dummy cvs2cl.pl; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_CVS2CL+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $CVS2CL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CVS2CL="$CVS2CL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_CVS2CL="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_CVS2CL" && ac_cv_path_CVS2CL="/usr/local/bin"
- ;;
-esac
-fi
-CVS2CL=$ac_cv_path_CVS2CL
-
-if test -n "$CVS2CL"; then
- echo "$as_me:$LINENO: result: $CVS2CL" >&5
-echo "${ECHO_T}$CVS2CL" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-
-# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_MSGFMT+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $MSGFMT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_MSGFMT="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="/usr/bin/msgfmt"
- ;;
-esac
-fi
-MSGFMT=$ac_cv_path_MSGFMT
-
-if test -n "$MSGFMT"; then
- echo "$as_me:$LINENO: result: $MSGFMT" >&5
-echo "${ECHO_T}$MSGFMT" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-
-# Extract the first word of "sh", so it can be a program name with args.
-set dummy sh; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_path_SH+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- case $SH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SH="$SH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
- test -z "$ac_cv_path_SH" && ac_cv_path_SH="/bin/sh"
- ;;
-esac
-fi
-SH=$ac_cv_path_SH
-
-if test -n "$SH"; then
- echo "$as_me:$LINENO: result: $SH" >&5
-echo "${ECHO_T}$SH" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-
-USER=sympa
-
-# Check whether --with-user or --without-user was given.
-if test "${with_user+set}" = set; then
- withval="$with_user"
- USER="$withval"
-fi;
-
-
-GROUP=sympa
-
-# Check whether --with-group or --without-group was given.
-if test "${with_group+set}" = set; then
- withval="$with_group"
- GROUP="$withval"
-fi;
-
-
-SENDMAIL_ALIASES=/etc/mail/sympa_aliases
-
-# Check whether --with-sendmail_aliases or --without-sendmail_aliases was
given.
-if test "${with_sendmail_aliases+set}" = set; then
- withval="$with_sendmail_aliases"
- SENDMAIL_ALIASES="$withval"
-fi;
-
-
-VIRTUAL_ALIASES=/etc/mail/sympa_virtual
-
-# Check whether --with-virtual_aliases or --without-virtual_aliases was
given.
-if test "${with_virtual_aliases+set}" = set; then
- withval="$with_virtual_aliases"
- VIRTUAL_ALIASES="$withval"
-fi;
-
-
-NEWALIASES=/usr/bin/newaliases
-
-# Check whether --with-newaliases or --without-newaliases was given.
-if test "${with_newaliases+set}" = set; then
- withval="$with_newaliases"
- NEWALIASES="$withval"
-fi;
-
-
-NEWALIASES_ARG=
-
-# Check whether --with-newaliases_arg or --without-newaliases_arg was given.
-if test "${with_newaliases_arg+set}" = set; then
- withval="$with_newaliases_arg"
- NEWALIASES_ARG="$withval"
-fi;
-
-
-POSTMAP=/usr/sbin/postmap
-
-# Check whether --with-postmap or --without-postmap was given.
-if test "${with_postmap+set}" = set; then
- withval="$with_postmap"
- POSTMAP="$withval"
-fi;
-
-
-POSTMAP_ARG=${VIRTUAL_ALIASES}
-
-# Check whether --with-postmap_arg or --without-postmap_arg was given.
-if test "${with_postmap_arg+set}" = set; then
- withval="$with_postmap_arg"
- POSTMAP_ARG="$withval"
-fi;
-
-
-echo "$as_me:$LINENO: checking whether to enable maintainer-specific
portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of
Makefiles... $ECHO_C" >&6
- # Check whether --enable-maintainer-mode or --disable-maintainer-mode
was given.
-if test "${enable_maintainer_mode+set}" = set; then
- enableval="$enable_maintainer_mode"
- USE_MAINTAINER_MODE=$enableval
-else
- USE_MAINTAINER_MODE=no
-fi;
- echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
-
-
-if test $USE_MAINTAINER_MODE = yes; then
- MAINTAINER_MODE_TRUE=
- MAINTAINER_MODE_FALSE='#'
-else
- MAINTAINER_MODE_TRUE='#'
- MAINTAINER_MODE_FALSE=
-fi
-
- MAINT=$MAINTAINER_MODE_TRUE
-
-
-
- ac_config_files="$ac_config_files Makefile"
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1='\\2'/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\$[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\$=\$.*\$/\\1=\\2/p"
- ;;
- esac;
-} |
- sed '
- t clear
- : clear
- s/^$[^=]*$=$.*[{}].*$$/test "${\1+set}" = set || &/
- t end
- /^ac_cv_env/!s/^$[^=]*$=$.*$$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
- cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^$[^=]*=[ ]*$:*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section. Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ ]*#[ ]*define[ ][ ]*$[^ (][^ (]*([^)]*)$[
]*$.*$,-D\1=\2,g
-t quote
-s,^[ ]*#[ ]*define[ ][ ]*$[^ ][^ ]*$[
]*$.*$,-D\1=\2,g
-t quote
-d
-: quote
-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output. A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
-
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never
defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}";
then
- { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never
defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-
-: ${CONFIG_STATUS=./config.status}
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-## --------------------- ##
-## M4sh Initialization. ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
- set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- as_unset=unset
-else
- as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
- LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
- LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
- LC_TELEPHONE LC_TIME
-do
- if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
- eval $as_var=C; export $as_var
- else
- $as_unset $as_var
- fi
-done
-
-# Required to use basename.
-if expr a : '$a$' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/$[^/][^/]*$/*$' \| \
- X"$0" : 'X$//$$' \| \
- X"$0" : 'X$/$$' \| \
- . : '$.$' 2>/dev/null ||
-echo X/"$0" |
- sed '/^.*\/$[^/][^/]*$\/*$/{ s//\1/; q; }
- /^X\/$\/\/$$/{ s//\1/; q; }
- /^X\/$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" || {
- # Find who we are. Look in the path if we contain no path at all
- # relative or not.
- case $0 in
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
- ;;
- esac
- # We did not find ourselves, most probably we were run as `sh COMMAND'
- # in which case we are not to be found in the path.
- if test "x$as_myself" = x; then
- as_myself=$0
- fi
- if test ! -f "$as_myself"; then
- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an
absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
- { (exit 1); exit 1; }; }
- fi
- case $CONFIG_SHELL in
- '')
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for as_base in sh bash ksh sh5; do
- case $as_dir in
- /*)
- if ("$as_dir/$as_base" -c '
- as_lineno_1=$LINENO
- as_lineno_2=$LINENO
- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
- test "x$as_lineno_1" != "x$as_lineno_2" &&
- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || {
BASH_ENV=; export BASH_ENV; }
- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV;
}
- CONFIG_SHELL=$as_dir/$as_base
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$0" ${1+"$@"}
- fi;;
- esac
- done
-done
-;;
- esac
-
- # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
- # uniformly replaced by the line number. The first 'sed' inserts a
- # line-number line before each line; the second 'sed' does the real
- # work. The second script uses 'N' to pair each line-number line
- # with the numbered line, and appends trailing '-' during
- # substitution so that $LINENO is not a special case at line end.
- # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
- sed '=' <$as_myself |
- sed '
- N
- s,$,-,
- : loop
-
s,^$['$as_cr_digits']*$$.*$[$]LINENO$[^'$as_cr_alnum'_]$,\1\2\1\3,
- t loop
- s,-$,,
- s,^['$as_cr_digits']*\n,,
- ' >$as_me.lineno &&
- chmod +x $as_me.lineno ||
- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with
a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell"
>&2;}
- { (exit 1); exit 1; }; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensible to this).
- . ./$as_me.lineno
- # Exit status is that of the last command.
- exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '$a$' >/dev/null 2>&1; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
- # We could just check for DJGPP; but this test a) works b) is more generic
- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
- if test -f conf$$.exe; then
- # Don't use ln at all; we don't have any links
- as_ln_s='cp -p'
- else
- as_ln_s='ln -s'
- fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p=:
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling. Logging --version etc. is OK.
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.59. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-_ACEOF
-
-# Files that config.status was made for.
-if test -n "$ac_config_files"; then
- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_links"; then
- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
-
-Configuration files:
-$config_files
-
-Configuration commands:
-$config_commands
-
-Report bugs to <address@concealed>."
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.59,
- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-# If no file are specified by the user, then we need to provide default
-# value. By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "x$1" : 'x$[^=]*$='`
- ac_optarg=`expr "x$1" : 'x[^=]*=$.*$'`
- ac_shift=:
- ;;
- -*)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- *) # This is not an option, so the user has probably given explicit
- # arguments.
- ac_option=$1
- ac_need_defaults=false;;
- esac
-
- case $ac_option in
- # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --vers* | -V )
- echo "$ac_cs_version"; exit 0 ;;
- --he | --h)
- # Conflict between --help and --header
- { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; };;
- --help | --hel | -h )
- echo "$ac_cs_usage"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- CONFIG_FILES="$CONFIG_FILES $ac_optarg"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
- ac_need_defaults=false;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
- { (exit 1); exit 1; }; } ;;
-
- *) ac_config_targets="$ac_config_targets $1" ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
-if \$ac_cs_recheck; then
- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args "
--no-create --no-recursion" >&6
- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create
--no-recursion
-fi
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-_ACEOF
-
-
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_config_target in $ac_config_targets
-do
- case "$ac_config_target" in
- # Handling of arguments.
- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target"
>&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
- { (exit 1); exit 1; }; };;
- esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
- trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./confstat$$-$RANDOM
- (umask 077 && mkdir $tmp)
-} ||
-{
- echo "$me: cannot create a temporary directory in ." >&2
- { (exit 1); exit 1; }
-}
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
- # Protect against being on the right side of a sed subst in config.status.
- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@MAJOR_VERSION@,$MAJOR_VERSION,;t t
-s,@MINOR_VERSION@,$MINOR_VERSION,;t t
-s,@MICRO_VERSION@,$MICRO_VERSION,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@target@,$target,;t t
-s,@target_cpu@,$target_cpu,;t t
-s,@target_vendor@,$target_vendor,;t t
-s,@target_os@,$target_os,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@CONFDIR@,$CONFDIR,;t t
-s,@CGIDIR@,$CGIDIR,;t t
-s,@BINDIR@,$BINDIR,;t t
-s,@SBINDIR@,$SBINDIR,;t t
-s,@LIBEXECDIR@,$LIBEXECDIR,;t t
-s,@LIBDIR@,$LIBDIR,;t t
-s,@DATADIR@,$DATADIR,;t t
-s,@EXPLDIR@,$EXPLDIR,;t t
-s,@MANDIR@,$MANDIR,;t t
-s,@INITDIR@,$INITDIR,;t t
-s,@LOCKDIR@,$LOCKDIR,;t t
-s,@PIDDIR@,$PIDDIR,;t t
-s,@ETCDIR@,$ETCDIR,;t t
-s,@LOCALEDIR@,$LOCALEDIR,;t t
-s,@DOCDIR@,$DOCDIR,;t t
-s,@SCRIPTDIR@,$SCRIPTDIR,;t t
-s,@SAMPLEDIR@,$SAMPLEDIR,;t t
-s,@SPOOLDIR@,$SPOOLDIR,;t t
-s,@enable_secure@,$enable_secure,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@CPP@,$CPP,;t t
-s,@EGREP@,$EGREP,;t t
-s,@PERL@,$PERL,;t t
-s,@SUIDPERL@,$SUIDPERL,;t t
-s,@SUDO@,$SUDO,;t t
-s,@MHONARC@,$MHONARC,;t t
-s,@OPENSSL@,$OPENSSL,;t t
-s,@CVS2CL@,$CVS2CL,;t t
-s,@MSGFMT@,$MSGFMT,;t t
-s,@SH@,$SH,;t t
-s,@USER@,$USER,;t t
-s,@GROUP@,$GROUP,;t t
-s,@SENDMAIL_ALIASES@,$SENDMAIL_ALIASES,;t t
-s,@VIRTUAL_ALIASES@,$VIRTUAL_ALIASES,;t t
-s,@NEWALIASES@,$NEWALIASES,;t t
-s,@NEWALIASES_ARG@,$NEWALIASES_ARG,;t t
-s,@POSTMAP@,$POSTMAP,;t t
-s,@POSTMAP_ARG@,$POSTMAP_ARG,;t t
-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-s,@MAINT@,$MAINT,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
- cat >>$CONFIG_STATUS <<\_ACEOF
- # Split the substitutions into bite-sized pieces for seds with
- # small command number limits, like on Digital OSF/1 and HP-UX.
- ac_max_sed_lines=48
- ac_sed_frag=1 # Number of current file.
- ac_beg=1 # First line for current file.
- ac_end=$ac_max_sed_lines # Line after last line for current file.
- ac_more_lines=:
- ac_sed_cmds=
- while $ac_more_lines; do
- if test $ac_beg -gt 1; then
- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- else
- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
- fi
- if test ! -s $tmp/subs.frag; then
- ac_more_lines=false
- else
- # The purpose of the label and of the branching condition is to
- # speed up the sed processing (if there are no `@' at all, there
- # is no need to browse any of the substitutions).
- # These are the two extra sed commands mentioned above.
- (echo ':t
- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag)
>$tmp/subs-$ac_sed_frag.sed
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
- else
- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
- fi
- ac_sed_frag=`expr $ac_sed_frag + 1`
- ac_beg=$ac_end
- ac_end=`expr $ac_end + $ac_max_sed_lines`
- fi
- done
- if test -z "$ac_sed_cmds"; then
- ac_sed_cmds=cat
- fi
-fi # test -n "$CONFIG_FILES"
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
- case $ac_file in
- - | *:- | *:-:* ) # input from stdin
- cat >$tmp/stdin
- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
- * ) ac_file_in=$ac_file.in ;;
- esac
-
- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
- ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X$//$[^/]' \| \
- X"$ac_file" : 'X$//$$' \| \
- X"$ac_file" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$ac_file" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X$//$[^/]' \| \
- X"$as_dir" : 'X$//$$' \| \
- X"$as_dir" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory
\"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
- esac
-
- if test x"$ac_file" != x-; then
- { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
- rm -f "$ac_file"
- fi
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- if test x"$ac_file" = x-; then
- configure_input=
- else
- configure_input="$ac_file. "
- fi
- configure_input=$configure_input"Generated from `echo $ac_file_in |
- sed 's,.*/,,'` by configure."
-
- # First look for the input files in the build tree, otherwise in the
- # src tree.
- ac_file_inputs=`IFS=:
- for f in $ac_file_in; do
- case $f in
- -) echo $tmp/stdin ;;
- [\\/$]*)
- # Absolute (can't be DOS-style, as IFS=:)
- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input
file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- echo "$f";;
- *) # Relative
- if test -f "$f"; then
- # Build tree
- echo "$f"
- elif test -f "$srcdir/$f"; then
- # Source tree
- echo "$srcdir/$f"
- else
- # /dev/null tree
- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
- { (exit 1); exit 1; }; }
- fi;;
- esac
- done` || { (exit 1); exit 1; }
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF
- sed "$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
- rm -f $tmp/stdin
- if test x"$ac_file" != x-; then
- mv $tmp/out $ac_file
- else
- cat $tmp/out
- rm -f $tmp/out
- fi
-
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
- ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
- ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$ac_dest" : 'X$//$[^/]' \| \
- X"$ac_dest" : 'X$//$$' \| \
- X"$ac_dest" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$ac_dest" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p "$ac_dir"
- else
- as_dir="$ac_dir"
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X$//$[^/]' \| \
- X"$as_dir" : 'X$//$$' \| \
- X"$as_dir" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory
\"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
- { (exit 1); exit 1; }; }; }
-
- ac_builddir=.
-
-if test "$ac_dir" != .; then
- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
- # A "../" for each directory in $ac_dir_suffix.
- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
- ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
- .) # No --srcdir option. We are building in place.
- ac_srcdir=.
- if test -z "$ac_top_builddir"; then
- ac_top_srcdir=.
- else
- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
- fi ;;
- [\\/]* | ?:[\\/]* ) # Absolute path.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir ;;
- *) # Relative path.
- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
- case "$ac_dir" in
- .) ac_abs_builddir=`pwd`;;
- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
- *) ac_abs_builddir=`pwd`/"$ac_dir";;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
- case ${ac_top_builddir}. in
- .) ac_abs_top_builddir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
- case $ac_srcdir in
- .) ac_abs_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
- esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
- case $ac_top_srcdir in
- .) ac_abs_top_srcdir=$ac_abs_builddir;;
- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
- esac;;
-esac
-
-
- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
- case $ac_dest in
- depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
- dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$mf" : 'X$//$[^/]' \| \
- X"$mf" : 'X$//$$' \| \
- X"$mf" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$mf" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote$.*(DEPDIR).*$$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$file" : 'X$//$[^/]' \| \
- X"$file" : 'X$//$$' \| \
- X"$file" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$file" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- { if $as_mkdir_p; then
- mkdir -p $dirpart/$fdir
- else
- as_dir=$dirpart/$fdir
- as_dirs=
- while test ! -d "$as_dir"; do
- as_dirs="$as_dir $as_dirs"
- as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X$.*[^/]$//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X$//$[^/]' \| \
- X"$as_dir" : 'X$//$$' \| \
- X"$as_dir" : 'X$/$' \| \
- . : '$.$' 2>/dev/null ||
-echo X"$as_dir" |
- sed '/^X$.*[^/]$\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
- /^X$\/\/$[^/].*/{ s//\1/; q; }
- /^X$\/\/$$/{ s//\1/; q; }
- /^X$\/$.*/{ s//\1/; q; }
- s/.*/./; q'`
- done
- test ! -n "$as_dirs" || mkdir $as_dirs
- fi || { { echo "$as_me:$LINENO: error: cannot create directory
$dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
- { (exit 1); exit 1; }; }; }
-
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
- esac
-done
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-{ (exit 0); exit 0; }
-_ACEOF
-chmod +x $CONFIG_STATUS
-ac_clean_files=$ac_clean_files_save
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || { (exit 1); exit 1; }
-fi
-
-
-
-
diff -Naur trunk/doc/man8/alias_manager.8 trunk-1/doc/man8/alias_manager.8
--- trunk/doc/man8/alias_manager.8 2008-03-03 20:53:48.000000000 +0100
+++ trunk-1/doc/man8/alias_manager.8 1970-01-01 01:00:00.000000000 +0100
@@ -1,204 +0,0 @@
-.\" Automatically generated by Pod::Man v1.37, Pod::Parser v1.32
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sh \" Subsection heading
-.br
-.if t .Sp
-.ne 5
-.PP
-\fB\\$1\fR
-.PP
-..
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. | will give a
-.\" real vertical bar. \*(C+ will give a nicer C++. Capital omega is used
to
-.\" do unbreakable dashes and therefore won't be available. \*(C` and \*(C'
-.\" expand to `' in nroff, nothing in troff, for use with C<>.
-.tr \(*W-|\(bv\*(Tr
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10
pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12
pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr
for
-.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.if \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.\"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.hy 0
-.if n .na
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds :
\\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o
\\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "ALIAS_MANAGER 8"
-.TH ALIAS_MANAGER 8 "2006-08-25" "5.3a.4" "sympa 5.3a.4"
-.SH "NAME"
-alias_manager (or alias_manager.pl) \- manage Sympa aliases
-.SH "SYNOPSYS"
-.IX Header "SYNOPSYS"
-\&\fBalias_manager\fR\ \fBadd\fR\ |\ \fBdel\fR\ \fIlistname\fR\ \fIdomain\fR
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-Alias_manager is a program that helps in installing aliases for newly
-created lists and deleting aliases for closed lists.
-.PP
-Is is called by
-\&\fIwwsympa.fcgi\fR via the \fIaliaswrapper\fR. Alias management is
performed
-by \fIwwsympa.fcgi\fR only if it was setup in
\fI\-\-CONFDIR\-\-/wwsympa.conf\fR
-(\fIsendmail_aliases\fR configuration parameter).
-.PP
-Administrators using \s-1MTA\s0 functionalities to manage aliases (ie
-virtual_regexp and transport_regexp with postfix) can disable alias
-management by setting
-\&\fIsendmail_aliases\fR configuration parameter to \fBnone\fR.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-.IP "\fBadd\fR \fIlistname\fR \fIdomain\fR" 5
-.IX Item "add listname domain"
-Add the set of aliases for the mailing list \fIlistname\fR in the
-domain \fIdomain\fR.
-.IP "\fBdel\fR \fIlistname\fR \fIdomain\fR" 5
-.IX Item "del listname domain"
-Remove the set of aliases for the mailing list \fIlistname\fR in the
-domain \fIdomain\fR.
-.SH "FILES"
-.IX Header "FILES"
-\&\fI\-\-SENDMAIL_ALIASES\-\-\fR sendmail aliases file.
-.SH "MORE DOCUMENTATION"
-.IX Header "MORE DOCUMENTATION"
-The full documentation in \s-1HTML\s0 and PostScript formats can be
-found in \fI/usr/share/doc/sympa/html/\fR.
-.PP
-The mailing lists (with web archives) can be accessed at
-http://listes.cru.fr/wws/lists/informatique/sympa.
-.SH "AUTHORS"
-.IX Header "AUTHORS"
-Serge Aumont
- Comité Réseau des Universités
-.PP
-Olivier Salaün
- Comité Réseau des Universités
-.PP
-Contact authors at <sympa\-address@concealed>
-.PP
-This manual page was initially written by Jérôme Marant
<address@concealed>
-for the Debian GNU/Linux system.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright © 1997,1998,1999,2000,2001 Comité Réseau des Universités
-.PP
-Copyright © 1997,1998,1999 Institut Pasteur & Christophe Wolfhugel
-.PP
-You may distribute this software under the terms of the \s-1GNU\s0 General
-Public License Version 2 (<http://www.gnu.org/copyleft/gpl.html>)
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, no Front-Cover Texts and no Back-Cover Texts. A
-copy of the license can be found under
-\&\fI/usr/share/common\-licenses/FDL\fR
-.SH "BUGS"
-.IX Header "BUGS"
-Report bugs to <sympa\-address@concealed>.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIsympa\fR\|(1), \fIsendmail\fR\|(8).
diff -Naur trunk/doc/man8/archived.8 trunk-1/doc/man8/archived.8
--- trunk/doc/man8/archived.8 2008-03-03 20:53:48.000000000 +0100
+++ trunk-1/doc/man8/archived.8 1970-01-01 01:00:00.000000000 +0100
@@ -1,219 +0,0 @@
-.\" Automatically generated by Pod::Man version 1.15
-.\" Wed Apr 9 15:40:04 2003
-.\"
-.\" Standard preamble:
-.\" ======================================================================
-.de Sh \" Subsection heading
-.br
-.if t .Sp
-.ne 5
-.PP
-\fB\\$1\fR
-.PP
-..
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Ip \" List item
-.br
-.ie \\n(.$>=3 .ne \\$3
-.el .ne 3
-.IP "\\$1" \\$2
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. | will give a
-.\" real vertical bar. \*(C+ will give a nicer C++. Capital omega is used
-.\" to do unbreakable dashes and therefore won't be available. \*(C` and
-.\" \*(C' expand to `' in nroff, nothing in troff, for use with C<>
-.tr \(*W-|\(bv\*(Tr
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10
pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12
pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr
-.\" for titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and
-.\" index entries marked with X<> in POD. Of course, you'll have to process
-.\" the output yourself in some meaningful fashion.
-.if \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.\"
-.\" For nroff, turn off justification. Always turn off hyphenation; it
-.\" makes way too many mistakes in technical documents.
-.hy 0
-.if n .na
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-.bd B 3
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds :
\\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o
\\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ======================================================================
-.\"
-.IX Title "archived 8"
-.TH archived 8 "4.0.a1" "2003-04-08" "sympa 4.0.a1"
-.UC
-.SH "NAME"
-archived (or archived.pl) \- Mailing List Archiving Daemon for WWSympa
-.SH "SYNOPSYS"
-.IX Header "SYNOPSYS"
-\&\fBarchived\fR\ [\ \fB\-F\fR\ ]\ [\ \fB\-d,\ \-dF\fR\ ]
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-\&\fBArchived\fR is a program which scan permanently the outgoing
\fBSympa\fR spool and
-feeds the web archives, converting messages to the \s-1HTML\s0 format and
-linking them. Original mails are also kept (in \fIarctxt/\fR directory> for
later rebuilding of
-archives.
-.PP
-The \s-1HTML\s0 conversion is achieved by the means of the \fBMhOnArc\fR
program.
-.PP
-Archives are accessed via \fBwwsympa.fcgi\fR, which proposes access control ;
-therefore archives should not be located in a public web directory.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-These programs follow the usual \s-1GNU\s0 command line syntax,
-with long options starting with two dashes (`\-'). A summary of
-options is included below.
-.Ip "\fB\-F\fR" 5
-.IX Item "-F"
-Do not detach \s-1TTY\s0.
-.Ip "\fB\-d\fR" 5
-.IX Item "-d"
-Run the program in a debug mode.
-.SH "FILES"
-.IX Header "FILES"
-\&\fI\*(--SPOOLDIR\-\-/outgoing/\fR outgoing Sympa directory.
-.PP
-\&\fI\*(--ETCBINDIR\-\-/mhonarc-ressources\fR mhonarc ressource file
-.PP
-\&\fI\*(--CONFDIR\-\-/wwsympa.conf\fR WWSympa configuration file.
-.PP
-\&\fI\*(--PIDDIR\-\-/archived.pid\fR this file contains the process \s-1ID\s0
-of \fIarchived.pl\fR.
-.SH "MORE DOCUMENTATION"
-.IX Header "MORE DOCUMENTATION"
-The full documentation in \s-1HTML\s0 and PostScript formats can be
-found in \fI/usr/share/doc/sympa/html/\fR.
-.PP
-The mailing lists (with web archives) can be accessed at
-http://listes.cru.fr/wws/lists/informatique/sympa.
-.SH "AUTHORS"
-.IX Header "AUTHORS"
-Serge Aumont
- Comité Réseau des Universités
-.PP
-Olivier Salaün
- Comité Réseau des Universités
-.PP
-Contact authors at <address@concealed>
-.PP
-This manual page was initially written by Jérôme Marant
<address@concealed>
-for the Debian GNU/Linux system.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright © 1997,1998,1999,2000,2001 Comité Réseau des Universités
-.PP
-Copyright © 1997,1998,1999 Institut Pasteur & Christophe Wolfhugel
-.PP
-You may distribute this software under the terms of the \s-1GNU\s0 General
-Public License Version 2 (http://www.gnu.org/copyleft/gpl.html)
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, no Front-Cover Texts and no Back-Cover Texts. A
-copy of the license can be found under
-\&\fI/usr/share/common-licenses/FDL\fR
-.SH "BUGS"
-.IX Header "BUGS"
-Report bugs to <address@concealed>.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIsympa\fR\|(8), \fIbounced\fR\|(8), \fImhonarc\fR\|(1),
\fIwwsympa.conf\fR\|(5).
diff -Naur trunk/doc/man8/bounced.8 trunk-1/doc/man8/bounced.8
--- trunk/doc/man8/bounced.8 2008-03-03 20:53:48.000000000 +0100
+++ trunk-1/doc/man8/bounced.8 1970-01-01 01:00:00.000000000 +0100
@@ -1,216 +0,0 @@
-.\" Automatically generated by Pod::Man version 1.15
-.\" Wed Apr 9 15:40:04 2003
-.\"
-.\" Standard preamble:
-.\" ======================================================================
-.de Sh \" Subsection heading
-.br
-.if t .Sp
-.ne 5
-.PP
-\fB\\$1\fR
-.PP
-..
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Ip \" List item
-.br
-.ie \\n(.$>=3 .ne \\$3
-.el .ne 3
-.IP "\\$1" \\$2
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. | will give a
-.\" real vertical bar. \*(C+ will give a nicer C++. Capital omega is used
-.\" to do unbreakable dashes and therefore won't be available. \*(C` and
-.\" \*(C' expand to `' in nroff, nothing in troff, for use with C<>
-.tr \(*W-|\(bv\*(Tr
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10
pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12
pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr
-.\" for titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and
-.\" index entries marked with X<> in POD. Of course, you'll have to process
-.\" the output yourself in some meaningful fashion.
-.if \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.\"
-.\" For nroff, turn off justification. Always turn off hyphenation; it
-.\" makes way too many mistakes in technical documents.
-.hy 0
-.if n .na
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-.bd B 3
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds :
\\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o
\\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ======================================================================
-.\"
-.IX Title "bounced 8"
-.TH bounced 8 "4.0.a1" "2001-05-11" "sympa 4.0.a1"
-.UC
-.SH "NAME"
-bounced (or bounced.pl) \- Mailing List Bounce Processing Daemon for WWSympa
-.SH "SYNOPSYS"
-.IX Header "SYNOPSYS"
-\&\fBbounced\fR\ [\ \fB\-F\fR\ ]\ [\ \fB\-d,\ \-dF\fR\ ]
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-Bounced is a program which scans permanently the bounce spool and
-processes bounces (non-delivery messages), looking or bad addresses.
-Bouncing addresses are tagged in database ; last bounce is kept for
-each bvouncing address.
-.PP
-List owners will latter access bounces information via WWSympa.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-These programs follow the usual \s-1GNU\s0 command line syntax,
-with long options starting with two dashes (`\-'). A summary of
-options is included below.
-.Ip "\fB\-F\fR" 5
-.IX Item "-F"
-Do not detach \s-1TTY\s0.
-.Ip "\fB\-d\fR, \fB\-dF\fR" 5
-.IX Item "-d, -dF"
-Run the program in a debug mode.
-.SH "FILES"
-.IX Header "FILES"
-\&\fI\*(--CONFDIR\-\-/wwsympa.conf\fR WWSympa configuration file.
-.PP
-\&\fI\*(--MAILERPROGDIR\-\-/bouncequeue\fR bounce spooler, referenced from
sendmail alias file
-.PP
-\&\fI\*(--SPOOLDIR\-\-/bounce\fR incoming bounces directory
-.PP
-\&\fI\*(--PIDDIR\-\-/bounced.pid\fR this file contains the process \s-1ID\s0
-of \fIbounced.pl\fR.
-.SH "MORE DOCUMENTATION"
-.IX Header "MORE DOCUMENTATION"
-The full documentation in \s-1HTML\s0 and PostScript formats can be
-found in \fI/usr/share/doc/sympa/html/\fR.
-.PP
-The mailing lists (with web archives) can be accessed at
-http://listes.cru.fr/wws/lists/informatique/sympa.
-.SH "AUTHORS"
-.IX Header "AUTHORS"
-Serge Aumont
- Comité Réseau des Universités
-.PP
-Olivier Salaün
- Comité Réseau des Universités
-.PP
-Contact authors at <address@concealed>
-.PP
-This manual page was initially written by Jérôme Marant
<address@concealed>
-for the Debian GNU/Linux system.
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright © 1997,1998,1999,2000,2001 Comité Réseau des Universités
-.PP
-Copyright © 1997,1998,1999 Institut Pasteur & Christophe Wolfhugel
-.PP
-You may distribute this software under the terms of the \s-1GNU\s0 General
-Public License Version 2 (http://www.gnu.org/copyleft/gpl.html)
-.PP
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the \s-1GNU\s0 Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, no Front-Cover Texts and no Back-Cover Texts. A
-copy of the license can be found under
-\&\fI/usr/share/common-licenses/FDL\fR
-.SH "BUGS"
-.IX Header "BUGS"
-Report bugs to <address@concealed>.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIsympa\fR\|(8), \fIarchived\fR\|(8), \fImhonarc\fR\|(1),
\fIwwsympa.conf\fR\|(5).
diff -Naur trunk/doc/man8/sympa.8 trunk-1/doc/man8/sympa.8
--- trunk/doc/man8/sympa.8 2008-03-03 20:53:48.000000000 +0100
+++ trunk-1/doc/man8/sympa.8 1970-01-01 01:00:00.000000000 +0100
@@ -1,261 +0,0 @@
-.\" Automatically generated by Pod::Man v1.37, Pod::Parser v1.32
-.\"
-.\" Standard preamble:
-.\" ========================================================================
-.de Sh \" Subsection heading
-.br
-.if t .Sp
-.ne 5
-.PP
-\fB\\$1\fR
-.PP
-..
-.de Sp \" Vertical space (when we can't use .PP)
-.if t .sp .5v
-.if n .sp
-..
-.de Vb \" Begin verbatim text
-.ft CW
-.nf
-.ne \\$1
-..
-.de Ve \" End verbatim text
-.ft R
-.fi
-..
-.\" Set up some character translations and predefined strings. \*(-- will
-.\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote. | will give a
-.\" real vertical bar. \*(C+ will give a nicer C++. Capital omega is used
to
-.\" do unbreakable dashes and therefore won't be available. \*(C` and \*(C'
-.\" expand to `' in nroff, nothing in troff, for use with C<>.
-.tr \(*W-|\(bv\*(Tr
-.ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
-.ie n \{\
-. ds -- \(*W-
-. ds PI pi
-. if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10
pitch
-. if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12
pitch
-. ds L" ""
-. ds R" ""
-. ds C` ""
-. ds C' ""
-'br\}
-.el\{\
-. ds -- \|\(em\|
-. ds PI \(*p
-. ds L" ``
-. ds R" ''
-'br\}
-.\"
-.\" If the F register is turned on, we'll generate index entries on stderr
for
-.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index
-.\" entries marked with X<> in POD. Of course, you'll have to process the
-.\" output yourself in some meaningful fashion.
-.if \nF \{\
-. de IX
-. tm Index:\\$1\t\\n%\t"\\$2"
-..
-. nr % 0
-. rr F
-.\}
-.\"
-.\" For nroff, turn off justification. Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.hy 0
-.if n .na
-.\"
-.\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
-.\" Fear. Run. Save yourself. No user-serviceable parts.
-. \" fudge factors for nroff and troff
-.if n \{\
-. ds #H 0
-. ds #V .8m
-. ds #F .3m
-. ds #[ \f1
-. ds #] \fP
-.\}
-.if t \{\
-. ds #H ((1u-(\\\\n(.fu%2u))*.13m)
-. ds #V .6m
-. ds #F 0
-. ds #[ \&
-. ds #] \&
-.\}
-. \" simple accents for nroff and troff
-.if n \{\
-. ds ' \&
-. ds ` \&
-. ds ^ \&
-. ds , \&
-. ds ~ ~
-. ds /
-.\}
-.if t \{\
-. ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u"
-. ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u'
-. ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u'
-. ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u'
-. ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u'
-. ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u'
-.\}
-. \" troff and (daisy-wheel) nroff accents
-.ds :
\\k:\h'-(\\n(.wu*8/10-\*(#H+.1m+\*(#F)'\v'-\*(#V'\z.\h'.2m+\*(#F'.\h'|\\n:u'\v'\*(#V'
-.ds 8 \h'\*(#H'\(*b\h'-\*(#H'
-.ds o
\\k:\h'-(\\n(.wu+\w'\(de'u-\*(#H)/2u'\v'-.3n'\*(#[\z\(de\v'.3n'\h'|\\n:u'\*(#]
-.ds d- \h'\*(#H'\(pd\h'-\w'~'u'\v'-.25m'\f2\(hy\fP\v'.25m'\h'-\*(#H'
-.ds D- D\\k:\h'-\w'D'u'\v'-.11m'\z\(hy\v'.11m'\h'|\\n:u'
-.ds th \*(#[\v'.3m'\s+1I\s-1\v'-.3m'\h'-(\w'I'u*2/3)'\s-1o\s+1\*(#]
-.ds Th \*(#[\s+2I\s-2\h'-\w'I'u*3/5'\v'-.3m'o\v'.3m'\*(#]
-.ds ae a\h'-(\w'a'u*4/10)'e
-.ds Ae A\h'-(\w'A'u*4/10)'E
-. \" corrections for vroff
-.if v .ds ~ \\k:\h'-(\\n(.wu*9/10-\*(#H)'\s-2\u~\d\s+2\h'|\\n:u'
-.if v .ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'\v'-.4m'^\v'.4m'\h'|\\n:u'
-. \" for low resolution devices (crt and lpr)
-.if \n(.H>23 .if \n(.V>19 \
-\{\
-. ds : e
-. ds 8 ss
-. ds o a
-. ds d- d\h'-1'\(ga
-. ds D- D\h'-1'\(hy
-. ds th \o'bp'
-. ds Th \o'LP'
-. ds ae ae
-. ds Ae AE
-.\}
-.rm #[ #] #H #V #F C
-.\" ========================================================================
-.\"
-.IX Title "SYMPA 8"
-.TH SYMPA 8 "2006-11-23" "5.3b.1" "sympa 5.3b.1"
-.SH "NAME"
-sympa (or sympa.pl) \- A Modern Mailing List Manager
-.SH "SYNOPSIS"
-.IX Header "SYNOPSIS"
-\&\fBsympa\fR\ [\ \fB\-d,\ \-\-debug\fR\ ]\ [\ \fB\-f,\
\-\-file\fR=\fIanother.sympa.conf\fR\ ]
- [\ \fB\-k,\ \-\-keepcopy\fR=\fIdirectory\fR\ ]
- [\ \fB\-l,\ \-\-lang\fR=\fIcatalog\fR\ ] [ \fB\-m, \-\-mail\fR ]
- [\ \fB\-h,\ \-\-help\fR\ ] [ \fB\-v, \-\-version\fR ]
-
- [\ \fB\-\-import\fR=\fIlistname\fR\ ] [
\fB\-\-close_list\fR=\fIlist[@robot]\fR][
\fB\-\-purge_list\fR=\fIlist[@robot]\fR]
- [\ \fB\-\-lowercase\fR\ ]\ [\ \fB\-\-make_alias_file\fR\ ]
- [\ \fB\-\-dump\fR=\fIlistname\fR\ |\ \s-1ALL\s0]
-.SH "DESCRIPTION"
-.IX Header "DESCRIPTION"
-\&\fBSympa\fR is scalable and highly customizable mailing list manager.
-It can cope with big lists (200,000 subscribers) and comes with
-a complete (user and admin) Web interface. It is
-internationalized, and supports the us, fr, de, es, it, fi, and
-chinese locales. A scripting language allows you to extend the
-behavior of commands. \fBSympa\fR can be linked to an \s-1LDAP\s0 directory
-or an \s-1RDBMS\s0 to create dynamic mailing lists. \fBSympa\fR provides
S/MIME
-and \s-1HTTPS\s0 based authentication and encryption.
-Sympa is a modern mailing-list manager. It supports a lot of useful
-features.
-.SH "OPTIONS"
-.IX Header "OPTIONS"
-.IP "\fB\-d, \-\-debug\fR" 5
-.IX Item "-d, --debug"
-Enable debug mode.
-.IP "\fB\-f, \-\-file=\fR\fIanother.sympa.conf\fR" 5
-.IX Item "-f, --file=another.sympa.conf"
-Force Sympa to use an alternative configuration file instead
-of \fI/etc/sympa/sympa.conf\fR.
-.IP "\fB\-k, \-\-keepcopy=\fR\fIdirectory\fR" 5
-.IX Item "-k, --keepcopy=directory"
-This option tells Sympa to keep a copy of every incoming message,
-instead of deleting them. `directory' is the directory to
-store messages.
-.IP "\fB\-l, \-\-lang=\fR\fIcatalog\fR" 5
-.IX Item "-l, --lang=catalog"
-Set this option to use a language catalog for Sympa. The corresponding
-catalog file `catalogue'.cat must be located in \fI/usr/lib/sympa/nls\fR
-directory.
-.IP "\fB\-m, \-\-mail\fR" 5
-.IX Item "-m, --mail"
-Sympa will log calls to sendmail, including recipients. This option is
-useful for keeping track of each mail sent (log files may grow faster
-though).
-.IP "\fB\-h, \-\-help\fR" 5
-.IX Item "-h, --help"
-Print this help message.
-.IP "\fB\-v, \-\-version\fR" 5
-.IX Item "-v, --version"
-Print the version number.
-.Sp
-With the following options \fIsympa.pl\fR will run in batch mode :
-.IP "\fB\-\-import=\fR\fIlist\fR" 5
-.IX Item "--import=list"
-Import subscribers in the list. Data are read from \s-1STDIN\s0.
-The imported data should contain one entry per line : the first field
-is an email address, the second (optional) field is the free form name.
-Fields are spaces\-separated.
-.Sp
-Sample :
-.Sp
-.Vb 4
-\& ## Data to be imported
-\& ## email gecos
-\& address@concealed John - accountant
-\& address@concealed Mary - secretary
-.Ve
-.IP "\fB\-\-close_list\fR=\fIlist[@robot]\fR" 5
-.IX Item "--close_list=list[@robot]"
-Close the list (changing its status to closed), remove aliases and remove
-subscribers from \s-1DB\s0 (a dump is created in the list directory to allow
restoring
-the list)
-.IP "\fB\-\-purge_list\fR=\fIlist[@robot]\fR" 5
-.IX Item "--purge_list=list[@robot]"
-Remove the list (remove archive, configuration files, users and owners in
admin table. Restore is not possible after this operation.
-.IP "\fB\-\-lowercase\fR" 5
-.IX Item "--lowercase"
-Lowercases email addresses in database.
-.IP "\fB\-\-make_alias_file\fR" 5
-.IX Item "--make_alias_file"
-Create an aliases file in /tmp/ with all list aliases. It uses the
list_aliases.tpl
-template.
-.IP "\fB\-\-dump=\fR\fIlistname\fR | \s-1ALL\s0" 5
-.IX Item "--dump=listname | ALL"
-Dumps subscribers of for `listname' list or all lists. Subscribers are
-dumped in subscribers.db.dump.
-.SH "FILES"
-.IX Header "FILES"
-\&\fI/etc/sympa/sympa.conf\fR main configuration file.
-.PP
-\&\fI/var/spool/sympa/sympa.pid\fR this file contains the process \s-1ID\s0
-of \fIsympa.pl\fR.
-.SH "AVAILABILITY"
-.IX Header "AVAILABILITY"
-Latest version of \fBSympa\fR is available from http://www.sympa.org.
-.SH "MORE DOCUMENTATION"
-.IX Header "MORE DOCUMENTATION"
-The full documentation in \s-1HTML\s0 and PostScript formats can be
-found in \fI/usr/share/doc/sympa/html/\fR.
-.PP
-The mailing lists (with web archives) can be accessed at
-http://listes.cru.fr/wws/lists/informatique/sympa.
-.SH "AUTHORS"
-.IX Header "AUTHORS"
-Serge Aumont
- Comité Réseau des Universités
-.PP
-Olivier Salaün
- Comité Réseau des Universités
-.PP
-Contact authors at <sympa\-address@concealed>
-.SH "COPYRIGHT"
-.IX Header "COPYRIGHT"
-Copyright © 1997,1998,1999,2000,2001 Comité Réseau des Universités
-.PP
-Copyright © 1997,1998,1999 Institut Pasteur & Christophe Wolfhugel
-.PP
-You may distribute this software under the terms of the \s-1GNU\s0 General
-Public License Version 2 (<http://www.gnu.org/copyleft/gpl.html>)
-.SH "BUGS"
-.IX Header "BUGS"
-Report bugs to <sympa\-address@concealed>.
-.SH "SEE ALSO"
-.IX Header "SEE ALSO"
-\&\fIsympa.conf\fR\|(5), \fIarchived\fR\|(8), \fIbounced\fR\|(8),
\fIsendmail\fR\|(8), \fIalias_manager\fR\|(8)
diff -Naur trunk/install-sh trunk-1/install-sh
--- trunk/install-sh 2008-03-03 20:53:58.000000000 +0100
+++ trunk-1/install-sh 1970-01-01 01:00:00.000000000 +0100
@@ -1,251 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission. M.I.T. makes no representations about the
-# suitability of this software for any purpose. It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch. It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env.
vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- chmodcmd=""
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi
&&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi
&&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi
&&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi
&&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
diff -Naur trunk/Makefile.in trunk-1/Makefile.in
--- trunk/Makefile.in 2008-03-03 20:53:58.000000000 +0100
+++ trunk-1/Makefile.in 1970-01-01 01:00:00.000000000 +0100
@@ -1,922 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile.am - Top-level Makefile.am for Sympa
-# RCS Identication ; $Revision: 4718 $ ; $Date: 2007-12-05 16:37:14 +0100
(mer, 05 dÃ©c 2007) $
-#
-# Sympa - SYsteme de Multi-Postage Automatique
-# Copyright (c) 1997, 1998, 1999, 2000, 2001 Comite Reseau des Universites
-# Copyright (c) 1997,1998, 1999 Institut Pasteur & Christophe Wolfhugel
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-#SUBDIRS = src doc wwsympa nls
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
- ChangeLog INSTALL NEWS config.guess config.sub install-sh \
- missing mkinstalldirs
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BINDIR = @BINDIR@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = -g
-CGIDIR = @CGIDIR@
-CONFDIR = @CONFDIR@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CVS2CL = @CVS2CL@
-CYGPATH_W = @CYGPATH_W@
-DATADIR = @DATADIR@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DOCDIR = @DOCDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-ETCDIR = @ETCDIR@
-EXEEXT = @EXEEXT@
-EXPLDIR = @EXPLDIR@
-GROUP = @GROUP@
-INITDIR = @INITDIR@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBDIR = @LIBDIR@
-LIBEXECDIR = @LIBEXECDIR@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LOCALEDIR = @LOCALEDIR@
-LOCKDIR = @LOCKDIR@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAJOR_VERSION = @MAJOR_VERSION@
-MAKEINFO = @MAKEINFO@
-#RPMTOPDIR = /usr/src/redhat
-MANDIR = @MANDIR@
-MHONARC = @MHONARC@
-MICRO_VERSION = @MICRO_VERSION@
-MINOR_VERSION = @MINOR_VERSION@
-MSGFMT = @MSGFMT@
-NEWALIASES = @NEWALIASES@
-
-# NEWALIASES_ARG = hash:/etc/mail/sympa_aliases
-NEWALIASES_ARG = @NEWALIASES_ARG@
-OBJEXT = @OBJEXT@
-OPENSSL = @OPENSSL@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-PIDDIR = @PIDDIR@
-POSTMAP = @POSTMAP@
-
-# POSTMAP_ARG = hash:/etc/mail/sympa_virtual
-POSTMAP_ARG = @POSTMAP_ARG@
-SAMPLEDIR = @SAMPLEDIR@
-SBINDIR = @SBINDIR@
-SCRIPTDIR = @SCRIPTDIR@
-SENDMAIL_ALIASES = @SENDMAIL_ALIASES@
-SET_MAKE = @SET_MAKE@
-SH = @SH@
-SHELL = @SHELL@
-SPOOLDIR = @SPOOLDIR@
-STRIP = @STRIP@
-SUDO = @SUDO@
-SUIDPERL = @SUIDPERL@
-USER = @USER@
-VERSION = @VERSION@
-VIRTUAL_ALIASES = @VIRTUAL_ALIASES@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-enable_secure = @enable_secure@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-HOST = `$(PERL) -MSys::Hostname -e "printf '%s', Sys::Hostname::hostname();"`
-COOKIE = `$(PERL) -e " print int(rand ( time )) "`
-PERL_VERSION = `$(PERL) -e ' print $$]'`
-SYMPA_VERSION = @VERSION@
-DIR = ${prefix}
-EXPL_DIR = @EXPLDIR@
-MAILERPROGDIR = @BINDIR@
-RPMTOPDIR = `rpm --eval %_topdir`
-WWSBINDIR = $(BINDIR)
-PIDPRE = pidof -x
-PIDPOST =
-SSLCERTDIR = $(EXPL_DIR)/X509-user-certs
-
-# Aix4.2 (and some others unix), use gnu make !
-#MAKE = @MAKE@
-
-# FreeBSD hier(7) structure and locations
-# by Autrijus Tang 2001/10/11
-#ifeq ($(shell uname), FreeBSD)
-# PIDPRE = ps -ax | grep
-# PIDPOST = | grep perl | head -n 1 | cut -f 2 -d " "
-# LOCKDIR = /var/spool/lock
-# RPMTOPDIR = /usr/local/src/redhat
-# OPENSSL = /usr/bin/openssl
-#endif
-CONFIG = $(CONFDIR)/sympa.conf
-WWSCONFIG = $(CONFDIR)/wwsympa.conf
-ETCBINDIR = @DATADIR@
-main_SRC = AUTHORS COPYING ChangeLog INSTALL KNOWNBUGS NEWS README
-
-#ifeq ($(shell uname), Linux)
-# LOG_SOCKET_TYPE="inet"
-#else
-LOG_SOCKET_TYPE = unix
-all: all-am
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am
$(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@
$(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@
$(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir);
fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {}
\; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e
's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS)
distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck;
\
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ;
\
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
\
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am am--refresh check check-am clean clean-generic dist \
- dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
- distcheck distclean distclean-generic distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
-
-
-ChangeLog:
- @CVS2CL@
-#endif
-
-all: warning checkperl checkcpan sources wrapper soap_wrapper man locale
-
-rpm: build_rh_rpm build_mdk_rpm
-
-warning:
- @echo "######################## W A R N I N G
######################"; \
- echo "## If it is the first time you install Sympa on this server :";
\
- echo "## It may take a while...."; \
- echo "## The reason is that Sympa requires many Perl modules that"; \
- echo "## are not distributed with the standard Perl distribution."; \
- echo "## We'll try to install these modules automatically..."; \
- echo "## If some modules cannot be installed automatically,
(probably" ; \
- echo "## because of the 'make test'), try downloading them from the";
\
- echo "## CPAN website (http://search.cpan.org) and install them
manually."; \
- echo "#############################################################";
\
- echo -n "Please hit <Enter> to proceed"; \
- if [ "$(DESTDIR)" = "" ]; then read rep; fi
-
-checkperl:
- @if [ $(PERL_VERSION) = '5.006' ]; then \
- echo "##################################"; \
- echo "## You are using Perl version $(PERL_VERSION) :"; \
- echo "## You need to patch your syslog.pm "; \
- echo "## See
http://bugs.perl.org/perlbug.cgi?req=bidmids&bidmids=20000712.003";; \
- echo "##"; \
- echo "## If your Perl version is 5.6.0 AND if your system is Solaris
:"; \
- echo "## See also
http://bugs.perl.org/perlbug.cgi?req=bidmids&bidmids=20000522.003";; \
- echo
"#############################################################################";
\
- if [ "$(DESTDIR)" = "" ]; then read rep; fi \
- fi
- @if [ ! -f $(SUIDPERL) ]; then \
- echo
"#################################################################################";
\
- echo "## wwsympa.fcgi that provides Sympa's web interface
needs to run as user $(USER)"; \
- echo "## There are many options to do so : "; \
- echo "## 1/ Installing 'suidperl' to run wwsympa.fcgi with
SetUID. This is the default method,"; \
- echo "## but it might be insecure."; \
- echo "## 2/ Use 'sudo' to run wwsympa.fcgi as user $(USER).
Your Apache configuration should use wwsympa_sudo_wrapper.pl"; \
- echo "## You should edit your /etc/sudoers file (with
visudo command) as follows :"; \
- echo "## apache ALL = ($(USER)) NOPASSWD:
$(CGIDIR)/wwsympa.fcgi"; \
- echo "## 3/ Use Apache's suExec mode."; \
- echo "## For (2) and (3) you should run Sympa's 'configure'
with the '--enable-secure' option"; \
- echo
"#######################################################################################";
\
- echo -n "Please hit <Enter> to continue"; \
- if [ "$(DESTDIR)" = "" ]; then read rep; fi \
- fi
- @if [ ! -f $(MSGFMT) ]; then \
- echo "##################################"; \
- echo "## You don't have msgfmt installed. It is required to
build message catalogues"; \
- echo "## msgfmt is provided with a 'gettext' package on most
systems..."; \
- echo "#####################################################";
\
- if [ "$(DESTDIR)" = "" ]; then read rep; fi \
- fi
-
-sources: src/Makefile src/queue.c src/bouncequeue.c src/aliaswrapper.c
- @echo "Making src"
- @(cd src && echo "making in src..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}'
LIBDIR='${LIBDIR}' WWSBINDIR='${WWSBINDIR}' \
- MAILERPROGDIR='${MAILERPROGDIR}' ETCBINDIR='${ETCBINDIR}'
ETCDIR='${ETCDIR}' \
- CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
- USER='${USER}' GROUP='${GROUP}' \
- SENDMAIL_ALIASES='${SENDMAIL_ALIASES}' \
- VIRTUAL_ALIASES='${VIRTUAL_ALIASES}' \
- NEWALIASES='${NEWALIASES}' NEWALIASES_ARG='${NEWALIASES_ARG}' \
- POSTMAP='${POSTMAP}' POSTMAP_ARG='${POSTMAP_ARG}' \
- PIDPRE='${PIDPRE}' PIDPOST='${PIDPOST}' LOCKDIR='${LOCKDIR}');
-
-wrapper: src/Makefile src/queue.c src/bouncequeue.c src/aliaswrapper.c
- @echo "Making wwsympa"
- @(cd wwsympa && echo "making in wwsympa..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}'
WWSYMPA='${CGIDIR}/wwsympa.fcgi');
-
-soap_wrapper: src/Makefile src/queue.c src/bouncequeue.c src/aliaswrapper.c
- @echo "Making sympa_soap"
- @(cd soap && echo "making in soap..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}'
SYMPASOAP='${CGIDIR}/sympa_soap_server.fcgi');
-
-documentation: doc/sympa.tex.tpl doc/Makefile
- @echo "Making documentation"
- @(cd doc && echo "making in doc/..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}'
CGIDIR='${CGIDIR}' \
- DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}'
LIBDIR='${LIBDIR}' WWSBINDIR='${WWSBINDIR}' \
- MAILERPROGDIR='${MAILERPROGDIR}' ETCBINDIR='${ETCBINDIR}'
ETCDIR='${ETCDIR}' PIDDIR='${PIDDIR}' \
- CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' EXPL_DIR='${EXPL_DIR}'
LOCALEDIR='${LOCALEDIR}' SPOOLDIR='${SPOOLDIR}' \
- SCRIPTDIR='${SCRIPTDIR}' \
- USER='${USER}' GROUP='${GROUP}');
-
-man: doc/man8/Makefile
- @echo "Making man"
- @(cd doc/man8 && echo "making in doc/man8/..." && \
- $(MAKE) SYMPA_VERSION='$(SYMPA_VERSION)');
-
-checkcpan:
- @echo "Checking needed CPAN modules ..."
- $(PERL) ./check_perl_modules.pl
-
-clean:
- find . $ -name ".#*" -o -name "*~" -o -name ".*~" -o -name "#*#" $
-exec rm -f {} \;
- @for i in src wwsympa src/etc/sample;\
- do \
- (cd $$i && echo "making clean in $$i..." && \
- $(MAKE) PERL='${PERL}' clean) || exit 1; \
- done;
-
-install: importantchanges installdir installsrc installwws installwebtt2
installmailtt2 installlocale installman installscript installsample
installconfig installdoc installsoap nextstep
-
-nextstep:
- @echo ""
- @echo "#########################################################"
- @echo "# If you install Sympa for the first time on this server"
- @echo "# you should check the INSTALL file."
- @echo "#"
- @echo "# If you are upgrading, you now need to run"
- @echo "# $(SBINDIR)/sympa.pl --upgrade"
- @echo "#######################################################"
-
-importantchanges:
- @( PERL=$(PERL); export PERL; \
- UMASK=0600; export UMASK; \
- DESTDIR=$(DESTDIR); export DESTDIR; \
- BINDIR=$(SBINDIR); export BINDIR; \
- SBINDIR=$(SBINDIR); export SBINDIR; \
- LIBDIR=$(LIBDIR); export LIBDIR; \
- ETCDIR=$(ETCDIR); export ETCDIR;\
- USER=$(USER); export USER;\
- GROUP=$(GROUP); export GROUP;\
- SYMPA_VERSION=$(SYMPA_VERSION); export SYMPA_VERSION; \
- $(PERL) ./important_changes.pl \
- ) ;
-
-locale:
- @(cd po && echo "making in po/...." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' LOCALEDIR='${LOCALEDIR}' ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
- SCRIPTDIR='${SCRIPTDIR}' \
- USER='${USER}' GROUP='${GROUP}') || exit 1;
-
-installlocale:
- @(cd po && echo "making install in po/...." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' LOCALEDIR='${LOCALEDIR}' ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
- USER='${USER}' GROUP='${GROUP}' install) || exit 1;
-
-updatelocale:
- @(cd po && echo "make update-po in po/...." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' LOCALEDIR='${LOCALEDIR}' ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
- SCRIPTDIR='${SCRIPTDIR}' \
- USER='${USER}' GROUP='${GROUP}' update-po) || exit 1;
-
-installsrc:
- @(cd src && echo "making in src..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}'
SYMPA_VERSION='${SYMPA_VERSION}' \
- DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}'
LIBDIR='${LIBDIR}' WWSBINDIR='${WWSBINDIR}' \
- DESTDIR='${DESTDIR}' MAILERPROGDIR='${MAILERPROGDIR}'
EXPL_DIR='${EXPL_DIR}' LIBEXECDIR='${LIBEXECDIR}' \
- PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}'
LOCALEDIR='${LOCALEDIR}' SCRIPTDIR='${SCRIPTDIR}' \
- ETCBINDIR='${ETCBINDIR}' ETCDIR='${ETCDIR}'
SENDMAIL_ALIASES='${SENDMAIL_ALIASES}' \
- VIRTUAL_ALIASES='${VIRTUAL_ALIASES}' HOST='${HOST}'
COOKIE='${COOKIE}' \
- SPOOLDIR='${SPOOLDIR}' LOG_SOCKET_TYPE='${LOG_SOCKET_TYPE}' \
- SSLCERTDIR='${SSLCERTDIR}' \
- PODIR='${prefix}/po' \
- USER='${USER}' GROUP='${GROUP}' newinstall) || exit 1;
-
-installdoc:
- @(cd doc && echo "make install in doc..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' DOCDIR='${DOCDIR}' ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' \
- SENDMAIL_ALIASES='${SENDMAIL_ALIASES}' \
- VIRTUAL_ALIASES='${VIRTUAL_ALIASES}' \
- USER='${USER}' GROUP='${GROUP}' install) || exit 1;
-
-installwws:
- @(cd wwsympa && echo "making in wwsympa..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}'
LIBDIR='${LIBDIR}' \
- USER='${USER}' GROUP='${GROUP}' SUDO='${SUDO}'
enable_secure='${enable_secure}' \
- CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}'
MAILERPROGDIR='${MAILERPROGDIR}' \
- PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}'
ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) ||
exit 1;
-
-installwebtt2:
- @(cd web_tt2 && echo "making in web_tt2..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}'
LIBDIR='${LIBDIR}' \
- USER='${USER}' GROUP='${GROUP}' \
- CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}'
MAILERPROGDIR='${MAILERPROGDIR}' \
- PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}'
ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) ||
exit 1;
-
-installmailtt2:
- @(cd mail_tt2 && echo "making in mail_tt2..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}'
LIBDIR='${LIBDIR}' \
- USER='${USER}' GROUP='${GROUP}' \
- CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}'
MAILERPROGDIR='${MAILERPROGDIR}' \
- PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}'
ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) ||
exit 1;
-
-installsoap:
- @(cd soap && echo "making in soap/..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' BINDIR='${BINDIR}' SBINDIR='${SBINDIR}'
LIBDIR='${LIBDIR}' \
- USER='${USER}' GROUP='${GROUP}' SCRIPTDIR='${SCRIPTDIR}' \
- CGIDIR='${CGIDIR}' WWSBINDIR='${WWSBINDIR}'
MAILERPROGDIR='${MAILERPROGDIR}' \
- PIDDIR='${PIDDIR}' CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}'
ETCBINDIR='${ETCBINDIR}' \
- DESTDIR='${DESTDIR}' USER='${USER}' GROUP='${GROUP}' newinstall) ||
exit 1;
-
-installsample:
- @(cd src/etc/sample && echo "making in src/etc/sample..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}'
LOG_SOCKET_TYPE='${LOG_SOCKET_TYPE}' \
- DESTDIR='${DESTDIR}' DIR='${DIR}' SAMPLEDIR='${SAMPLEDIR}' \
- BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
- EXPL_DIR='${EXPL_DIR}' WWSBINDIR='${WWSBINDIR}' HOST='${HOST}' \
- CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}'
MAILERPROGDIR='${MAILERPROGDIR}' \
- COOKIE='${COOKIE}' OPENSSL='@OPENSSL@' SSLCERTDIR='${SSLCERTDIR}' \
- SPOOLDIR='${SPOOLDIR}' USER='${USER}' GROUP='${GROUP}'
PIDDIR='${PIDDIR}' install) || exit 1;
-
-installman:
- @(cd doc/man8 && \
- $(MAKE) PERL='${PERL}' DIR='${DIR}' DESTDIR='${DESTDIR}'
SYMPA_VERSION='${SYMPA_VERSION}' MANDIR='${MANDIR}' \
- USER='${USER}' GROUP='${GROUP}' \
- CONFDIR='${CONFDIR}' SENDMAIL_ALIASES='${SENDMAIL_ALIASES}'
VIRTUAL_ALIASES='${VIRTUAL_ALIASES}' UMASK='${UMASK}' \
- MAILERPROGDIR='${MAILERPROGDIR}' PIDDIR='${PIDDIR}'
SPOOLDIR='${SPOOLDIR}' PIDDIR='${PIDDIR}' ETCBINDIR='${ETCBINDIR}' \
- newinstall) || exit 1;
-
-installscript:
- @(cd src/etc/script && echo "making in src/etc/script..." && \
- $(MAKE) SH='${SH}' CC='${CC}' CFLAGS='${CFLAGS}' PERL='${PERL}' \
- DIR='${DIR}' DESTDIR='${DESTDIR}' SCRIPTDIR='${SCRIPTDIR}' \
- BINDIR='${BINDIR}' SBINDIR='${SBINDIR}' LIBDIR='${LIBDIR}' \
- WWSBINDIR='${WWSBINDIR}' HOST='${HOST}' \
- CONFIG='${CONFIG}' WWSCONFIG='${WWSCONFIG}' ETCBINDIR='${ETCBINDIR}' \
- MAILERPROGDIR='${MAILERPROGDIR}' PIDDIR='${PIDDIR}' \
- COOKIE='${COOKIE}' INITDIR='${INITDIR}' \
- PIDPRE='${PIDPRE}' PIDPOST='${PIDPOST}' LOCKDIR='${LOCKDIR}' \
- OPENSSL='@OPENSSL@' USER='${USER}' GROUP='${GROUP}' install) || exit
1;
-
-installdir:
- @echo "Creating required directories"
- @for dir in $(DIR) $(EXPL_DIR) $(CONFDIR) $(SAMPLEDIR) $(ETCDIR)
$(BINDIR) $(LOCALEDIR) $(DOCDIR) $(DIR)/static_content
$(DIR)/static_content/icons ; do \
- if [ ! -d $(DESTDIR)$$dir ] ; then \
- echo "Creating $(DESTDIR)$$dir"; \
- mkdir -p $(DESTDIR)$$dir; \
- chown $(USER) $(DESTDIR)$$dir; \
- chgrp $(GROUP) $(DESTDIR)$$dir; \
- chmod 755 $(DESTDIR)$$dir; \
- fi \
- done
- @if [ ! -f $(DESTDIR)$(CONFDIR)/sympa.conf ] ; then \
- echo "First installation : installing conf directories..."; \
- for dir in create_list_templates mail_tt2 web_tt2 scenari \
- task_models general_task_models; do \
- if [ ! -d $(DESTDIR)$(ETCDIR)/$$dir ] ; then \
- echo "Creating $(DESTDIR)$(ETCDIR)/$$dir"; \
- mkdir -p $(DESTDIR)$(ETCDIR)/$$dir; \
- chown $(USER) $(DESTDIR)$(ETCDIR)/$$dir; \
- chgrp $(GROUP) $(DESTDIR)$(ETCDIR)/$$dir; \
- fi \
- done; \
- ( \
- PERL=$(PERL); export PERL; \
- UMASK=0600; export UMASK; \
- INSTALLDIR=$(ETCDIR); export INSTALLDIR; \
- USER=$(USER); export USER;\
- GROUP=$(GROUP); export GROUP;\
- INSTALLNAME='README'; export INSTALLNAME; \
- ETCDIR=$(ETCDIR); export ETCDIR; \
- ETCBINDIR=$(ETCBINDIR); export ETCBINDIR; \
- $(PERL) ./subst.pl src/etc/README_etc \
- ) \
- fi
- @if [ ! -f $(DESTDIR)$(CONFDIR)/sympa.conf ] ; then \
- echo "First installation : installing spool directories..."; \
- for dir in $(SPOOLDIR) $(SPOOLDIR)/msg $(SPOOLDIR)/digest
$(SPOOLDIR)/moderation \
- $(SPOOLDIR)/expire $(SPOOLDIR)/auth $(SPOOLDIR)/outgoing
$(SPOOLDIR)/tmp \
- $(SPOOLDIR)/task ; do \
- if [ ! -d $(DESTDIR)$$dir ] ; then \
- echo "Creating $(DESTDIR)$$dir"; \
- mkdir -p $(DESTDIR)$$dir; \
- chown $(USER) $(DESTDIR)$$dir; \
- chgrp $(GROUP) $(DESTDIR)$$dir; \
- chmod 770 $(DESTDIR)$$dir; \
- fi \
- done \
- fi
- @if [ ! -f $(DESTDIR)$(CONFDIR)/sympa.conf ] ; then \
- echo "First installation : creating archives and bounce
directories..."; \
- for dir in bounce arc ; do \
- if [ ! -d $(DESTDIR)$(DIR)/$$dir ] ; then \
- echo "Creating $(DESTDIR)$(DIR)/$$dir"; \
- mkdir -p $(DESTDIR)$(DIR)/$$dir; \
- chown $(USER) $(DESTDIR)$(DIR)/$$dir; \
- chgrp $(GROUP) $(DESTDIR)$(DIR)/$$dir; \
- fi \
- done \
- fi
-
-installconfig:
- mkdir -p $(DESTDIR)$(CONFDIR)
- @INITCONF='0'
- @for cfile in sympa.conf wwsympa.conf ; do \
- if [ ! -f $(DESTDIR)$(CONFDIR)/$$cfile ] ; then \
- echo "Installing sample config file $$cfile..."; \
- DESTDIR=$(DESTDIR); export DESTDIR; \
- $(PERL) -I $(DESTDIR)$(LIBDIR) $(DESTDIR)$(SBINDIR)/sympa_wizard.pl
-c $$cfile; \
- chown $(USER) $(DESTDIR)$(CONFDIR)/$$cfile; \
- chgrp $(GROUP) $(DESTDIR)$(CONFDIR)/$$cfile; \
- if [ "$(DESTDIR)" = "" ]; then \
- INITCONF='1'; \
- fi \
- fi \
- done; \
- if [ "$$INITCONF" ] ; then \
- echo "###############################################"; \
- echo "It seems to be your first installation of Sympa"; \
- echo "The following wizard will help you create your
$(CONFDIR)/sympa.conf and $(CONFDIR)/wwsympa.conf :"; \
- DESTDIR=$(DESTDIR); export DESTDIR; \
- $(PERL) -I $(DESTDIR)$(LIBDIR) $(DESTDIR)$(SBINDIR)/sympa_wizard.pl; \
- fi
-
-build_rh_rpm: clean
- @echo "Building RedHat RPM in $(RPMTOPDIR) ..."
- @( \
- cd src/etc/script/ ; \
- PERL=$(PERL); export PERL; \
- UMASK=0600; export UMASK; \
- INSTALLDIR=$(RPMTOPDIR)/SPECS; export INSTALLDIR; \
- SUFFIX=''; export SUFFIX; \
- ZIPEXT='gz'; export ZIPEXT; \
- APPGROUP='System Environment/Daemons'; export APPGROUP; \
- MTA='smtpdaemon'; export MTA; \
- HOMEDIR='/var/sympa'; export HOMEDIR; \
- PIDDIR='/var/run/sympa'; export PIDDIR; \
- VERSION=$(SYMPA_VERSION); export VERSION; \
- CONFDIR='/etc'; export CONFDIR; \
- SENDMAIL_ALIASES='/etc/mail/sympa_aliases'; export
SENDMAIL_ALIASES; \
- MAILERPROGDIR='/etc/smrsh'; export MAILERPROGDIR; \
- INITDIR='/etc/rc.d/init.d'; export INITDIR; \
- SPOOLDIR='/var/sympa/spool'; export SPOOLDIR; \
- BINDIR='/etc/smrsh'; export BINDIR; \
- SBINDIR='/var/sympa/sbin'; export SBINDIR; \
- DATADIR='/usr/share/sympa'; export DATADIR; \
- EXPLDIR='/var/sympa/expl'; export EXPLDIR; \
- LIBDIR='/usr/lib/sympa/bin'; export LIBDIR; \
- CGIDIR='/var/www/cgi-bin'; export CGIDIR; \
- LOCALEDIR='/usr/lib/sympa/locale'; export LOCALEDIR; \
- SCRIPTDIR='/var/sympa/bin'; export SCRIPTDIR; \
- LIBEXECDIR='/var/sympa/bin'; export LIBEXECDIR; \
- SAMPLEDIR='/usr/share/sympa/examples'; export SAMPLEDIR; \
- ETCDIR='/etc/sympa'; export ETCDIR; \
- $(PERL) ../../../subst.pl sympa.spec.rh80 \
- )
- mv $(RPMTOPDIR)/SPECS/sympa.spec.rh80 $(RPMTOPDIR)/SPECS/sympa.spec
- @( \
- cd ..; \
- tar -cvf $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar
sympa-$(SYMPA_VERSION); \
- gzip $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar; \
- )
- rpmbuild -ba $(RPMTOPDIR)/SPECS/sympa.spec
-
-build_mdk_rpm: clean
- @echo "Building Mandrake RPM in $(RPMTOPDIR) ..."
- @( \
- cd src/etc/script/ ; \
- PERL=$(PERL); export PERL; \
- UMASK=0600; export UMASK; \
- INSTALLDIR=$(RPMTOPDIR)/SPECS; export INSTALLDIR; \
- SUFFIX='mdk'; export SUFFIX; \
- ZIPEXT='bz2'; export ZIPEXT; \
- APPGROUP='System/Servers'; export APPGROUP; \
- MTA='MailTransportAgent'; export MTA; \
- HOMEDIR='/var/lib/sympa'; export HOMEDIR; \
- VERSION=$(SYMPA_VERSION); export VERSION; \
- CONFDIR='/etc/sympa'; export CONFDIR; \
- SENDMAIL_ALIASES='/etc/mail/sympa_aliases'; export
SENDMAIL_ALIASES; \
- MAILERPROGDIR='/usr/lib/sympa/bin'; export MAILERPROGDIR; \
- PIDDIR='/var/run/sympa'; export PIDDIR; \
- INITDIR='/etc/rc.d/init.d'; export INITDIR; \
- SPOOLDIR='/var/spool/sympa'; export SPOOLDIR; \
- BINDIR='/usr/lib/sympa/bin'; export BINDIR; \
- SBINDIR='/usr/lib/sympa/bin'; export SBINDIR; \
- DATADIR='/usr/share/sympa'; export DATADIR; \
- EXPLDIR='/var/lib/sympa/expl'; export EXPLDIR; \
- LIBDIR='/usr/lib/sympa/bin'; export LIBDIR; \
- CGIDIR='/var/www/cgi-bin'; export CGIDIR; \
- LOCALEDIR='/usr/lib/sympa/locale'; export LOCALEDIR; \
- SCRIPTDIR='/usr/lib/sympa/bin'; export SCRIPTDIR; \
- LIBEXECDIR='/usr/lib/sympa/bin'; export LIBEXECDIR; \
- SAMPLEDIR='/usr/share/sympa/examples'; export SAMPLEDIR; \
- ETCDIR='/etc/sympa'; export ETCDIR; \
- $(PERL) ../../../subst.pl sympa.spec \
- )
- @( \
- cd ..; \
- tar -cvf $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar
sympa-$(SYMPA_VERSION); \
- bzip2 $(RPMTOPDIR)/SOURCES/sympa-$(SYMPA_VERSION).tar; \
- )
- rpmbuild -ba $(RPMTOPDIR)/SPECS/sympa.spec
-
-tag: ChangeLog
- @if [ ! $(NEW_VERSION) ]; then \
- echo "Current version is $(VERSION)"; \
- echo "You need to define NEW_VERSION"; \
- else echo $(NEW_VERSION) > .version; cvs ci -m 'preparing
$(NEW_VERSION)' .version ChangeLog; cvs tag -F `echo sympa-$(NEW_VERSION)|sed
's/\./_/g'`; \
- fi
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff -Naur trunk/missing trunk-1/missing
--- trunk/missing 2008-03-03 20:53:58.000000000 +0100
+++ trunk-1/missing 1970-01-01 01:00:00.000000000 +0100
@@ -1,336 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <address@concealed>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-case "$1" in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing 0.4 - GNU automake"
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
- aclocal*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER($[^)]*$).*/\1/p'
${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case "$f" in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1Help2man' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n 's/.*--output[ =]*$[^ ]*$.*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*$[^ ]*$.*/\1/p'`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if [ ! -f y.tab.h ]; then
- echo >y.tab.h
- fi
- if [ ! -f y.tab.c ]; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if [ ! -f lex.yy.c ]; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=$[^ ]*$.*/\1/p'`
- fi
- if [ -f "$file" ]; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o $[^ ]*$.*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed 's/.* $[^ ]*$ *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* $[^ ]*$ *$/\1/; p; q; }' $file`
- fi
- touch $file
- ;;
-
- tar)
- shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case "$firstarg" in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case "$firstarg" in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequirements for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
diff -Naur trunk-1/configure.ac trunk-2/configure.ac
--- trunk-1/configure.ac 1970-01-01 01:00:00.000000000 +0100
+++ trunk-2/configure.ac 2008-03-03 20:59:52.000000000 +0100
@@ -0,0 +1,204 @@
+# configure.in - Top-level configure.in for Sympa
+# RCS Identication ; $Revision: 4592 $ ; $Date: 2007-09-11 17:34:07 +0200
(mar, 11 sep 2007) $
+#
+# Sympa - SYsteme de Multi-Postage Automatique
+# Copyright (c) 1997, 1998, 1999, 2000, 2001 Comite Reseau des Universites
+# Copyright (c) 1997,1998, 1999 Institut Pasteur & Christophe Wolfhugel
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+AC_INIT(check_perl_modules.pl)
+PACKAGE=sympa
+VERSION=`cat ${srcdir}/.version`
+MAJOR_VERSION=[`expr $VERSION : '$[0-9][0-9]*$'`]
+AC_SUBST(MAJOR_VERSION)
+MINOR_VERSION=[`expr $VERSION : '[0-9][0-9]*\.$[0-9][0-9]*$'`]
+AC_SUBST(MINOR_VERSION)
+MICRO_VERSION=[`expr $VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.$[0-9][0-9]*$'`]
+AC_SUBST(MICRO_VERSION)
+AC_CANONICAL_SYSTEM
+AC_CANONICAL_HOST
+AM_INIT_AUTOMAKE([sympa], $VERSION, nosubst)
+AC_PREREQ(2.13)
+
+AC_PREFIX_DEFAULT(/home/sympa)
+
+## Directories setup
+## for main config files
+
+## location of main config files
+CONFDIR='/etc'
+AC_ARG_WITH(confdir, [ --with-confdir=DIR Sympa main configuration
files in DIR (default /etc)], [CONFDIR="$withval"])
+AC_SUBST(CONFDIR)
+
+## location of CGIs
+CGIDIR='${prefix}/bin'
+AC_ARG_WITH(cgidir, [ --with-cgidir=DIR CGIs in DIR (default
${prefix}/bin)], [CGIDIR="$withval"])
+AC_SUBST(CGIDIR)
+
+## location of user executables
+BINDIR='${prefix}/bin'
+AC_ARG_WITH(bindir, [ --with-bindir=DIR user executables in DIR
(default ${prefix}/bin). queue and bouncequeue programs will be installed in
this directory. If sendmail is configured to use smrsh (check the mailer prog
definition in your sendmail.cf), this should point to /etc/smrsh. This is
probably the case if you are using Linux], [BINDIR="$withval"])
+AC_SUBST(BINDIR)
+
+## location of system admin executables
+SBINDIR='${prefix}/bin'
+AC_ARG_WITH(sbindir, [ --with-sbindir=DIR system admin executables in
DIR (default ${prefix}/bin)], [SBINDIR="$withval"])
+AC_SUBST(SBINDIR)
+
+## location of program executables
+LIBEXECDIR='${prefix}/bin'
+AC_ARG_WITH(libexecdir, [ --with-libexecdir=DIR program executables in
DIR (default ${prefix}/bin)], [LIBEXECDIR="$withval"])
+AC_SUBST(LIBEXECDIR)
+
+## location of Perl modules
+LIBDIR='${prefix}/bin'
+AC_ARG_WITH(libdir, [ --with-libdir=DIR Perl modules in DIR (default
${prefix}/bin)], [LIBDIR="$withval"])
+AC_SUBST(LIBDIR)
+
+## location of default *read-only* data files
+DATADIR='${prefix}/bin/etc'
+AC_ARG_WITH(datadir, [ --with-datadir=DIR default *read-only* data
files in DIR (default ${prefix}/bin/etc)], [DATADIR="$withval"])
+AC_SUBST(DATADIR)
+
+## location of modifiable data files
+EXPLDIR='${prefix}/expl'
+AC_ARG_WITH(expldir, [ --with-expldir=DIR modifiable data files in DIR
(default ${prefix}/expl)], [EXPLDIR="$withval"])
+AC_SUBST(EXPLDIR)
+
+## location of documentation
+MANDIR='/usr/local/man'
+AC_ARG_WITH(mandir, [ --with-mandir=DIR documentation in DIR (default
/usr/local/man)], [MANDIR="$withval"])
+AC_SUBST(MANDIR)
+
+## SYS V init scripts directory
+INITDIR=/etc/rc.d/init.d
+AC_ARG_WITH(initdir, [ --with-initdir=DIR install System V init script
in DIR (default /etc/rc.d/init.d)], [INITDIR="$withval"])
+AC_SUBST(INITDIR)
+
+## Lock directory
+LOCKDIR=/var/lock/subsys
+AC_ARG_WITH(lockdir, [ --with-lockdir=DIR create lock files in DIR
(default /var/lock/subsys)], [LOCKDIR="$withval"])
+AC_SUBST(LOCKDIR)
+
+## directory for storing .pid files
+PIDDIR='${prefix}'
+AC_ARG_WITH(piddir, [ --with-piddir=DIR create .pid files in DIR
(default ${prefix})], [PIDDIR="$withval"])
+AC_SUBST(PIDDIR)
+
+## directory for Config directories populated by the user
+ETCDIR='${prefix}/etc'
+AC_ARG_WITH(etcdir, [ --with-etcdir=DIR Config directories populated by
the user are in DIR (default ${prefix}/etc)], [ETCDIR="$withval"])
+AC_SUBST(ETCDIR)
+
+## directory for language files
+LOCALEDIR='${prefix}/locale'
+AC_ARG_WITH(localedir, [ --with-localedir=DIR create language files in
DIR (default ${prefix}/locale)], [LOCALEDIR="$withval"])
+AC_SUBST(LOCALEDIR)
+
+## directory for Documentation files
+DOCDIR='${prefix}/doc'
+AC_ARG_WITH(docdir, [ --with-docdir=DIR create documentation files in
DIR (default ${prefix}/doc)], [DOCDIR="$withval"])
+AC_SUBST(DOCDIR)
+
+## directory for script files
+SCRIPTDIR='${prefix}/bin'
+AC_ARG_WITH(scriptdir, [ --with-scriptdir=DIR create script files in
DIR (default ${prefix}/bin)], [SCRIPTDIR="$withval"])
+AC_SUBST(SCRIPTDIR)
+
+## directory for sample files
+SAMPLEDIR='${prefix}/sample'
+AC_ARG_WITH(sampledir, [ --with-sampledir=DIR create sample files in
DIR (default ${prefix}/sample)], [SAMPLEDIR="$withval"])
+AC_SUBST(SAMPLEDIR)
+
+## directory for sample files
+SPOOLDIR='${prefix}/spool'
+AC_ARG_WITH(spooldir, [ --with-spooldir=DIR spool directory is DIR
(default ${prefix}/spool)], [SPOOLDIR="$withval"])
+AC_SUBST(SPOOLDIR)
+
+## to run wwsympa.fcgi without setuidperl
+AC_ARG_ENABLE(secure, [ --enable-secure install wwsympa to be run in a
secure mode, without suidperl (default disabled)])
+AC_SUBST(enable_secure)
+
+dnl Checks for programs.
+AC_PROG_CC
+AC_PROG_MAKE_SET
+AC_AIX
+
+AC_PATH_PROG(PERL, perl, /usr/bin/perl)
+AC_ARG_WITH(perl, [ --with-perl=FULLPATH set full path to Perl
interpreter (default /usr/bin/perl)], [PERL="$withval"])
+AC_SUBST(PERL)
+
+AC_PATH_PROG(SUIDPERL, suidperl, /usr/bin/suidperl)
+AC_SUBST(SUIDPERL)
+
+AC_PATH_PROG(SUDO, sudo, /usr/bin/sudo)
+AC_SUBST(SUDO)
+
+AC_PATH_PROG(MHONARC, mhonarc, /usr/bin/mhonarc)
+AC_ARG_WITH(mhonarc, [ --with-mhonarc=FULLPATH set full path to
MhOnArc mail archiving system (default /usr/bin/mhonarc)],
[MHONARC="$withval"])
+AC_SUBST(MHONARC)
+
+AC_PATH_PROG(OPENSSL, openssl, /usr/local/ssl/bin)
+AC_ARG_WITH(openssl, [ --with-openssl=FULLPATH set path to OpenSSL
(default /usr/local/ssl/bin/openssl)], [OPENSSL="$withval"])
+AC_SUBST(OPENSSL)
+
+AC_PATH_PROG(CVS2CL, cvs2cl.pl, /usr/local/bin)
+AC_SUBST(CVS2CL)
+
+AC_PATH_PROG(MSGFMT, msgfmt, /usr/bin/msgfmt)
+AC_SUBST(MSGFMT)
+
+AC_PATH_PROG(SH, sh, /bin/sh)
+
+USER=sympa
+AC_ARG_WITH(user, [ --with-user=LOGIN set sympa user name (default
sympa)], [USER="$withval"])
+AC_SUBST(USER)
+
+GROUP=sympa
+AC_ARG_WITH(group, [ --with-group=LOGIN set sympa group name (default
sympa)], [GROUP="$withval"])
+AC_SUBST(GROUP)
+
+SENDMAIL_ALIASES=/etc/mail/sympa_aliases
+AC_ARG_WITH(sendmail_aliases, [ --with-sendmail_aliases=ALIASFILE set
aliases file to be used by Sympa (default /etc/mail/sympa_aliases)],
[SENDMAIL_ALIASES="$withval"])
+AC_SUBST(SENDMAIL_ALIASES)
+
+VIRTUAL_ALIASES=/etc/mail/sympa_virtual
+AC_ARG_WITH(virtual_aliases, [ --with-virtual_aliases=ALIASFILE set
postfix virtual file to be used by Sympa (default /etc/mail/sympa_virtual)],
[VIRTUAL_ALIASES="$withval"])
+AC_SUBST(VIRTUAL_ALIASES)
+
+NEWALIASES=/usr/bin/newaliases
+AC_ARG_WITH(newaliases, [ --with-newaliases=FULLPATH set path to
newaliases command (default /usr/bin/newaliases)], [NEWALIASES="$withval"])
+AC_SUBST(NEWALIASES)
+
+NEWALIASES_ARG=
+AC_ARG_WITH(newaliases_arg, [ --with-newaliases_arg=ARGS set arguments
to newaliases command (default NONE)], [NEWALIASES_ARG="$withval"])
+AC_SUBST(NEWALIASES_ARG)
+
+POSTMAP=/usr/sbin/postmap
+AC_ARG_WITH(postmap, [ --with-postmap=FULLPATH set path to postfix
postmap command (default /usr/sbin/postmap)], [POSTMAP="$withval"])
+AC_SUBST(POSTMAP)
+
+POSTMAP_ARG=${VIRTUAL_ALIASES}
+AC_ARG_WITH(postmap_arg, [ --with-postmap_arg=ARGS set arguments to
postfix postmap command (default [same as virtual_aliases])],
[POSTMAP_ARG="$withval"])
+AC_SUBST(POSTMAP_ARG)
+
+dnl Initialize maintainer mode
+AM_MAINTAINER_MODE
+
+AC_OUTPUT(Makefile)
+
+
+
diff -Naur trunk-1/configure.in trunk-2/configure.in
--- trunk-1/configure.in 2008-03-03 20:55:09.000000000 +0100
+++ trunk-2/configure.in 1970-01-01 01:00:00.000000000 +0100
@@ -1,204 +0,0 @@
-# configure.in - Top-level configure.in for Sympa
-# RCS Identication ; $Revision: 4592 $ ; $Date: 2007-09-11 17:34:07 +0200
(mar, 11 sep 2007) $
-#
-# Sympa - SYsteme de Multi-Postage Automatique
-# Copyright (c) 1997, 1998, 1999, 2000, 2001 Comite Reseau des Universites
-# Copyright (c) 1997,1998, 1999 Institut Pasteur & Christophe Wolfhugel
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-AC_INIT(check_perl_modules.pl)
-PACKAGE=sympa
-VERSION=`cat ${srcdir}/.version`
-MAJOR_VERSION=[`expr $VERSION : '$[0-9][0-9]*$'`]
-AC_SUBST(MAJOR_VERSION)
-MINOR_VERSION=[`expr $VERSION : '[0-9][0-9]*\.$[0-9][0-9]*$'`]
-AC_SUBST(MINOR_VERSION)
-MICRO_VERSION=[`expr $VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.$[0-9][0-9]*$'`]
-AC_SUBST(MICRO_VERSION)
-AC_CANONICAL_SYSTEM
-AC_CANONICAL_HOST
-AM_INIT_AUTOMAKE([sympa], $VERSION, nosubst)
-AC_PREREQ(2.13)
-
-AC_PREFIX_DEFAULT(/home/sympa)
-
-## Directories setup
-## for main config files
-
-## location of main config files
-CONFDIR='/etc'
-AC_ARG_WITH(confdir, [ --with-confdir=DIR Sympa main configuration
files in DIR (default /etc)], [CONFDIR="$withval"])
-AC_SUBST(CONFDIR)
-
-## location of CGIs
-CGIDIR='${prefix}/bin'
-AC_ARG_WITH(cgidir, [ --with-cgidir=DIR CGIs in DIR (default
${prefix}/bin)], [CGIDIR="$withval"])
-AC_SUBST(CGIDIR)
-
-## location of user executables
-BINDIR='${prefix}/bin'
-AC_ARG_WITH(bindir, [ --with-bindir=DIR user executables in DIR
(default ${prefix}/bin). queue and bouncequeue programs will be installed in
this directory. If sendmail is configured to use smrsh (check the mailer prog
definition in your sendmail.cf), this should point to /etc/smrsh. This is
probably the case if you are using Linux], [BINDIR="$withval"])
-AC_SUBST(BINDIR)
-
-## location of system admin executables
-SBINDIR='${prefix}/bin'
-AC_ARG_WITH(sbindir, [ --with-sbindir=DIR system admin executables in
DIR (default ${prefix}/bin)], [SBINDIR="$withval"])
-AC_SUBST(SBINDIR)
-
-## location of program executables
-LIBEXECDIR='${prefix}/bin'
-AC_ARG_WITH(libexecdir, [ --with-libexecdir=DIR program executables in
DIR (default ${prefix}/bin)], [LIBEXECDIR="$withval"])
-AC_SUBST(LIBEXECDIR)
-
-## location of Perl modules
-LIBDIR='${prefix}/bin'
-AC_ARG_WITH(libdir, [ --with-libdir=DIR Perl modules in DIR (default
${prefix}/bin)], [LIBDIR="$withval"])
-AC_SUBST(LIBDIR)
-
-## location of default *read-only* data files
-DATADIR='${prefix}/bin/etc'
-AC_ARG_WITH(datadir, [ --with-datadir=DIR default *read-only* data
files in DIR (default ${prefix}/bin/etc)], [DATADIR="$withval"])
-AC_SUBST(DATADIR)
-
-## location of modifiable data files
-EXPLDIR='${prefix}/expl'
-AC_ARG_WITH(expldir, [ --with-expldir=DIR modifiable data files in DIR
(default ${prefix}/expl)], [EXPLDIR="$withval"])
-AC_SUBST(EXPLDIR)
-
-## location of documentation
-MANDIR='/usr/local/man'
-AC_ARG_WITH(mandir, [ --with-mandir=DIR documentation in DIR (default
/usr/local/man)], [MANDIR="$withval"])
-AC_SUBST(MANDIR)
-
-## SYS V init scripts directory
-INITDIR=/etc/rc.d/init.d
-AC_ARG_WITH(initdir, [ --with-initdir=DIR install System V init script
in DIR (default /etc/rc.d/init.d)], [INITDIR="$withval"])
-AC_SUBST(INITDIR)
-
-## Lock directory
-LOCKDIR=/var/lock/subsys
-AC_ARG_WITH(lockdir, [ --with-lockdir=DIR create lock files in DIR
(default /var/lock/subsys)], [LOCKDIR="$withval"])
-AC_SUBST(LOCKDIR)
-
-## directory for storing .pid files
-PIDDIR='${prefix}'
-AC_ARG_WITH(piddir, [ --with-piddir=DIR create .pid files in DIR
(default ${prefix})], [PIDDIR="$withval"])
-AC_SUBST(PIDDIR)
-
-## directory for Config directories populated by the user
-ETCDIR='${prefix}/etc'
-AC_ARG_WITH(etcdir, [ --with-etcdir=DIR Config directories populated by
the user are in DIR (default ${prefix}/etc)], [ETCDIR="$withval"])
-AC_SUBST(ETCDIR)
-
-## directory for language files
-LOCALEDIR='${prefix}/locale'
-AC_ARG_WITH(localedir, [ --with-localedir=DIR create language files in
DIR (default ${prefix}/locale)], [LOCALEDIR="$withval"])
-AC_SUBST(LOCALEDIR)
-
-## directory for Documentation files
-DOCDIR='${prefix}/doc'
-AC_ARG_WITH(docdir, [ --with-docdir=DIR create documentation files in
DIR (default ${prefix}/doc)], [DOCDIR="$withval"])
-AC_SUBST(DOCDIR)
-
-## directory for script files
-SCRIPTDIR='${prefix}/bin'
-AC_ARG_WITH(scriptdir, [ --with-scriptdir=DIR create script files in
DIR (default ${prefix}/bin)], [SCRIPTDIR="$withval"])
-AC_SUBST(SCRIPTDIR)
-
-## directory for sample files
-SAMPLEDIR='${prefix}/sample'
-AC_ARG_WITH(sampledir, [ --with-sampledir=DIR create sample files in
DIR (default ${prefix}/sample)], [SAMPLEDIR="$withval"])
-AC_SUBST(SAMPLEDIR)
-
-## directory for sample files
-SPOOLDIR='${prefix}/spool'
-AC_ARG_WITH(spooldir, [ --with-spooldir=DIR spool directory is DIR
(default ${prefix}/spool)], [SPOOLDIR="$withval"])
-AC_SUBST(SPOOLDIR)
-
-## to run wwsympa.fcgi without setuidperl
-AC_ARG_ENABLE(secure, [ --enable-secure install wwsympa to be run in a
secure mode, without suidperl (default disabled)])
-AC_SUBST(enable_secure)
-
-dnl Checks for programs.
-AC_PROG_CC
-AC_PROG_MAKE_SET
-AC_AIX
-
-AC_PATH_PROG(PERL, perl, /usr/bin/perl)
-AC_ARG_WITH(perl, [ --with-perl=FULLPATH set full path to Perl
interpreter (default /usr/bin/perl)], [PERL="$withval"])
-AC_SUBST(PERL)
-
-AC_PATH_PROG(SUIDPERL, suidperl, /usr/bin/suidperl)
-AC_SUBST(SUIDPERL)
-
-AC_PATH_PROG(SUDO, sudo, /usr/bin/sudo)
-AC_SUBST(SUDO)
-
-AC_PATH_PROG(MHONARC, mhonarc, /usr/bin/mhonarc)
-AC_ARG_WITH(mhonarc, [ --with-mhonarc=FULLPATH set full path to
MhOnArc mail archiving system (default /usr/bin/mhonarc)],
[MHONARC="$withval"])
-AC_SUBST(MHONARC)
-
-AC_PATH_PROG(OPENSSL, openssl, /usr/local/ssl/bin)
-AC_ARG_WITH(openssl, [ --with-openssl=FULLPATH set path to OpenSSL
(default /usr/local/ssl/bin/openssl)], [OPENSSL="$withval"])
-AC_SUBST(OPENSSL)
-
-AC_PATH_PROG(CVS2CL, cvs2cl.pl, /usr/local/bin)
-AC_SUBST(CVS2CL)
-
-AC_PATH_PROG(MSGFMT, msgfmt, /usr/bin/msgfmt)
-AC_SUBST(MSGFMT)
-
-AC_PATH_PROG(SH, sh, /bin/sh)
-
-USER=sympa
-AC_ARG_WITH(user, [ --with-user=LOGIN set sympa user name (default
sympa)], [USER="$withval"])
-AC_SUBST(USER)
-
-GROUP=sympa
-AC_ARG_WITH(group, [ --with-group=LOGIN set sympa group name (default
sympa)], [GROUP="$withval"])
-AC_SUBST(GROUP)
-
-SENDMAIL_ALIASES=/etc/mail/sympa_aliases
-AC_ARG_WITH(sendmail_aliases, [ --with-sendmail_aliases=ALIASFILE set
aliases file to be used by Sympa (default /etc/mail/sympa_aliases)],
[SENDMAIL_ALIASES="$withval"])
-AC_SUBST(SENDMAIL_ALIASES)
-
-VIRTUAL_ALIASES=/etc/mail/sympa_virtual
-AC_ARG_WITH(virtual_aliases, [ --with-virtual_aliases=ALIASFILE set
postfix virtual file to be used by Sympa (default /etc/mail/sympa_virtual)],
[VIRTUAL_ALIASES="$withval"])
-AC_SUBST(VIRTUAL_ALIASES)
-
-NEWALIASES=/usr/bin/newaliases
-AC_ARG_WITH(newaliases, [ --with-newaliases=FULLPATH set path to
newaliases command (default /usr/bin/newaliases)], [NEWALIASES="$withval"])
-AC_SUBST(NEWALIASES)
-
-NEWALIASES_ARG=
-AC_ARG_WITH(newaliases_arg, [ --with-newaliases_arg=ARGS set arguments
to newaliases command (default NONE)], [NEWALIASES_ARG="$withval"])
-AC_SUBST(NEWALIASES_ARG)
-
-POSTMAP=/usr/sbin/postmap
-AC_ARG_WITH(postmap, [ --with-postmap=FULLPATH set path to postfix
postmap command (default /usr/sbin/postmap)], [POSTMAP="$withval"])
-AC_SUBST(POSTMAP)
-
-POSTMAP_ARG=${VIRTUAL_ALIASES}
-AC_ARG_WITH(postmap_arg, [ --with-postmap_arg=ARGS set arguments to
postfix postmap command (default [same as virtual_aliases])],
[POSTMAP_ARG="$withval"])
-AC_SUBST(POSTMAP_ARG)
-
-dnl Initialize maintainer mode
-AM_MAINTAINER_MODE
-
-AC_OUTPUT(Makefile)
-
-
-
diff -Naur trunk-2/configure.ac trunk-3/configure.ac
--- trunk-2/configure.ac 2008-03-03 20:59:52.000000000 +0100
+++ trunk-3/configure.ac 2008-03-03 21:02:36.000000000 +0100
@@ -19,19 +19,9 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

-AC_INIT(check_perl_modules.pl)
-PACKAGE=sympa
-VERSION=`cat ${srcdir}/.version`
-MAJOR_VERSION=[`expr $VERSION : '$[0-9][0-9]*$'`]
-AC_SUBST(MAJOR_VERSION)
-MINOR_VERSION=[`expr $VERSION : '[0-9][0-9]*\.$[0-9][0-9]*$'`]
-AC_SUBST(MINOR_VERSION)
-MICRO_VERSION=[`expr $VERSION : '[0-9][0-9]*\.[0-9][0-9]*\.$[0-9][0-9]*$'`]
-AC_SUBST(MICRO_VERSION)
-AC_CANONICAL_SYSTEM
-AC_CANONICAL_HOST
-AM_INIT_AUTOMAKE([sympa], $VERSION, nosubst)
-AC_PREREQ(2.13)
+AC_PREREQ(2.59)
+AC_INIT(sympa, 5.4b1, address@concealed)
+AM_INIT_AUTOMAKE

AC_PREFIX_DEFAULT(/home/sympa)

@@ -198,7 +188,5 @@
dnl Initialize maintainer mode
AM_MAINTAINER_MODE

-AC_OUTPUT(Makefile)
-
-
-
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff -Naur trunk-2/configure.ac~ trunk-3/configure.ac~
--- trunk-2/configure.ac~ 1970-01-01 01:00:00.000000000 +0100
+++ trunk-3/configure.ac~ 2008-03-03 21:01:31.000000000 +0100
@@ -0,0 +1,192 @@
+# configure.in - Top-level configure.in for Sympa
+# RCS Identication ; $Revision: 4592 $ ; $Date: 2007-09-11 17:34:07 +0200
(mar, 11 sep 2007) $
+#
+# Sympa - SYsteme de Multi-Postage Automatique
+# Copyright (c) 1997, 1998, 1999, 2000, 2001 Comite Reseau des Universites
+# Copyright (c) 1997,1998, 1999 Institut Pasteur & Christophe Wolfhugel
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+AC_PREREQ(2.59)
+AC_INIT(sympa, 5.3.4, address@concealed)
+AM_INIT_AUTOMAKE
+
+AC_PREFIX_DEFAULT(/home/sympa)
+
+## Directories setup
+## for main config files
+
+## location of main config files
+CONFDIR='/etc'
+AC_ARG_WITH(confdir, [ --with-confdir=DIR Sympa main configuration
files in DIR (default /etc)], [CONFDIR="$withval"])
+AC_SUBST(CONFDIR)
+
+## location of CGIs
+CGIDIR='${prefix}/bin'
+AC_ARG_WITH(cgidir, [ --with-cgidir=DIR CGIs in DIR (default
${prefix}/bin)], [CGIDIR="$withval"])
+AC_SUBST(CGIDIR)
+
+## location of user executables
+BINDIR='${prefix}/bin'
+AC_ARG_WITH(bindir, [ --with-bindir=DIR user executables in DIR
(default ${prefix}/bin). queue and bouncequeue programs will be installed in
this directory. If sendmail is configured to use smrsh (check the mailer prog
definition in your sendmail.cf), this should point to /etc/smrsh. This is
probably the case if you are using Linux], [BINDIR="$withval"])
+AC_SUBST(BINDIR)
+
+## location of system admin executables
+SBINDIR='${prefix}/bin'
+AC_ARG_WITH(sbindir, [ --with-sbindir=DIR system admin executables in
DIR (default ${prefix}/bin)], [SBINDIR="$withval"])
+AC_SUBST(SBINDIR)
+
+## location of program executables
+LIBEXECDIR='${prefix}/bin'
+AC_ARG_WITH(libexecdir, [ --with-libexecdir=DIR program executables in
DIR (default ${prefix}/bin)], [LIBEXECDIR="$withval"])
+AC_SUBST(LIBEXECDIR)
+
+## location of Perl modules
+LIBDIR='${prefix}/bin'
+AC_ARG_WITH(libdir, [ --with-libdir=DIR Perl modules in DIR (default
${prefix}/bin)], [LIBDIR="$withval"])
+AC_SUBST(LIBDIR)
+
+## location of default *read-only* data files
+DATADIR='${prefix}/bin/etc'
+AC_ARG_WITH(datadir, [ --with-datadir=DIR default *read-only* data
files in DIR (default ${prefix}/bin/etc)], [DATADIR="$withval"])
+AC_SUBST(DATADIR)
+
+## location of modifiable data files
+EXPLDIR='${prefix}/expl'
+AC_ARG_WITH(expldir, [ --with-expldir=DIR modifiable data files in DIR
(default ${prefix}/expl)], [EXPLDIR="$withval"])
+AC_SUBST(EXPLDIR)
+
+## location of documentation
+MANDIR='/usr/local/man'
+AC_ARG_WITH(mandir, [ --with-mandir=DIR documentation in DIR (default
/usr/local/man)], [MANDIR="$withval"])
+AC_SUBST(MANDIR)
+
+## SYS V init scripts directory
+INITDIR=/etc/rc.d/init.d
+AC_ARG_WITH(initdir, [ --with-initdir=DIR install System V init script
in DIR (default /etc/rc.d/init.d)], [INITDIR="$withval"])
+AC_SUBST(INITDIR)
+
+## Lock directory
+LOCKDIR=/var/lock/subsys
+AC_ARG_WITH(lockdir, [ --with-lockdir=DIR create lock files in DIR
(default /var/lock/subsys)], [LOCKDIR="$withval"])
+AC_SUBST(LOCKDIR)
+
+## directory for storing .pid files
+PIDDIR='${prefix}'
+AC_ARG_WITH(piddir, [ --with-piddir=DIR create .pid files in DIR
(default ${prefix})], [PIDDIR="$withval"])
+AC_SUBST(PIDDIR)
+
+## directory for Config directories populated by the user
+ETCDIR='${prefix}/etc'
+AC_ARG_WITH(etcdir, [ --with-etcdir=DIR Config directories populated by
the user are in DIR (default ${prefix}/etc)], [ETCDIR="$withval"])
+AC_SUBST(ETCDIR)
+
+## directory for language files
+LOCALEDIR='${prefix}/locale'
+AC_ARG_WITH(localedir, [ --with-localedir=DIR create language files in
DIR (default ${prefix}/locale)], [LOCALEDIR="$withval"])
+AC_SUBST(LOCALEDIR)
+
+## directory for Documentation files
+DOCDIR='${prefix}/doc'
+AC_ARG_WITH(docdir, [ --with-docdir=DIR create documentation files in
DIR (default ${prefix}/doc)], [DOCDIR="$withval"])
+AC_SUBST(DOCDIR)
+
+## directory for script files
+SCRIPTDIR='${prefix}/bin'
+AC_ARG_WITH(scriptdir, [ --with-scriptdir=DIR create script files in
DIR (default ${prefix}/bin)], [SCRIPTDIR="$withval"])
+AC_SUBST(SCRIPTDIR)
+
+## directory for sample files
+SAMPLEDIR='${prefix}/sample'
+AC_ARG_WITH(sampledir, [ --with-sampledir=DIR create sample files in
DIR (default ${prefix}/sample)], [SAMPLEDIR="$withval"])
+AC_SUBST(SAMPLEDIR)
+
+## directory for sample files
+SPOOLDIR='${prefix}/spool'
+AC_ARG_WITH(spooldir, [ --with-spooldir=DIR spool directory is DIR
(default ${prefix}/spool)], [SPOOLDIR="$withval"])
+AC_SUBST(SPOOLDIR)
+
+## to run wwsympa.fcgi without setuidperl
+AC_ARG_ENABLE(secure, [ --enable-secure install wwsympa to be run in a
secure mode, without suidperl (default disabled)])
+AC_SUBST(enable_secure)
+
+dnl Checks for programs.
+AC_PROG_CC
+AC_PROG_MAKE_SET
+AC_AIX
+
+AC_PATH_PROG(PERL, perl, /usr/bin/perl)
+AC_ARG_WITH(perl, [ --with-perl=FULLPATH set full path to Perl
interpreter (default /usr/bin/perl)], [PERL="$withval"])
+AC_SUBST(PERL)
+
+AC_PATH_PROG(SUIDPERL, suidperl, /usr/bin/suidperl)
+AC_SUBST(SUIDPERL)
+
+AC_PATH_PROG(SUDO, sudo, /usr/bin/sudo)
+AC_SUBST(SUDO)
+
+AC_PATH_PROG(MHONARC, mhonarc, /usr/bin/mhonarc)
+AC_ARG_WITH(mhonarc, [ --with-mhonarc=FULLPATH set full path to
MhOnArc mail archiving system (default /usr/bin/mhonarc)],
[MHONARC="$withval"])
+AC_SUBST(MHONARC)
+
+AC_PATH_PROG(OPENSSL, openssl, /usr/local/ssl/bin)
+AC_ARG_WITH(openssl, [ --with-openssl=FULLPATH set path to OpenSSL
(default /usr/local/ssl/bin/openssl)], [OPENSSL="$withval"])
+AC_SUBST(OPENSSL)
+
+AC_PATH_PROG(CVS2CL, cvs2cl.pl, /usr/local/bin)
+AC_SUBST(CVS2CL)
+
+AC_PATH_PROG(MSGFMT, msgfmt, /usr/bin/msgfmt)
+AC_SUBST(MSGFMT)
+
+AC_PATH_PROG(SH, sh, /bin/sh)
+
+USER=sympa
+AC_ARG_WITH(user, [ --with-user=LOGIN set sympa user name (default
sympa)], [USER="$withval"])
+AC_SUBST(USER)
+
+GROUP=sympa
+AC_ARG_WITH(group, [ --with-group=LOGIN set sympa group name (default
sympa)], [GROUP="$withval"])
+AC_SUBST(GROUP)
+
+SENDMAIL_ALIASES=/etc/mail/sympa_aliases
+AC_ARG_WITH(sendmail_aliases, [ --with-sendmail_aliases=ALIASFILE set
aliases file to be used by Sympa (default /etc/mail/sympa_aliases)],
[SENDMAIL_ALIASES="$withval"])
+AC_SUBST(SENDMAIL_ALIASES)
+
+VIRTUAL_ALIASES=/etc/mail/sympa_virtual
+AC_ARG_WITH(virtual_aliases, [ --with-virtual_aliases=ALIASFILE set
postfix virtual file to be used by Sympa (default /etc/mail/sympa_virtual)],
[VIRTUAL_ALIASES="$withval"])
+AC_SUBST(VIRTUAL_ALIASES)
+
+NEWALIASES=/usr/bin/newaliases
+AC_ARG_WITH(newaliases, [ --with-newaliases=FULLPATH set path to
newaliases command (default /usr/bin/newaliases)], [NEWALIASES="$withval"])
+AC_SUBST(NEWALIASES)
+
+NEWALIASES_ARG=
+AC_ARG_WITH(newaliases_arg, [ --with-newaliases_arg=ARGS set arguments
to newaliases command (default NONE)], [NEWALIASES_ARG="$withval"])
+AC_SUBST(NEWALIASES_ARG)
+
+POSTMAP=/usr/sbin/postmap
+AC_ARG_WITH(postmap, [ --with-postmap=FULLPATH set path to postfix
postmap command (default /usr/sbin/postmap)], [POSTMAP="$withval"])
+AC_SUBST(POSTMAP)
+
+POSTMAP_ARG=${VIRTUAL_ALIASES}
+AC_ARG_WITH(postmap_arg, [ --with-postmap_arg=ARGS set arguments to
postfix postmap command (default [same as virtual_aliases])],
[POSTMAP_ARG="$withval"])
+AC_SUBST(POSTMAP_ARG)
+
+dnl Initialize maintainer mode
+AM_MAINTAINER_MODE
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff -Naur trunk-2/.version trunk-3/.version
--- trunk-2/.version 2008-03-03 20:59:52.000000000 +0100
+++ trunk-3/.version 1970-01-01 01:00:00.000000000 +0100
@@ -1 +0,0 @@
-5.4b.1
\ Pas de fin de ligne Ã la fin du fichier.
diff -Naur trunk-3/configure.ac trunk-4/configure.ac
--- trunk-3/configure.ac 2008-03-03 21:02:36.000000000 +0100
+++ trunk-4/configure.ac 2008-03-03 21:48:36.000000000 +0100
@@ -25,99 +25,6 @@

AC_PREFIX_DEFAULT(/home/sympa)

-## Directories setup
-## for main config files
-
-## location of main config files
-CONFDIR='/etc'
-AC_ARG_WITH(confdir, [ --with-confdir=DIR Sympa main configuration
files in DIR (default /etc)], [CONFDIR="$withval"])
-AC_SUBST(CONFDIR)
-
-## location of CGIs
-CGIDIR='${prefix}/bin'
-AC_ARG_WITH(cgidir, [ --with-cgidir=DIR CGIs in DIR (default
${prefix}/bin)], [CGIDIR="$withval"])
-AC_SUBST(CGIDIR)
-
-## location of user executables
-BINDIR='${prefix}/bin'
-AC_ARG_WITH(bindir, [ --with-bindir=DIR user executables in DIR
(default ${prefix}/bin). queue and bouncequeue programs will be installed in
this directory. If sendmail is configured to use smrsh (check the mailer prog
definition in your sendmail.cf), this should point to /etc/smrsh. This is
probably the case if you are using Linux], [BINDIR="$withval"])
-AC_SUBST(BINDIR)
-
-## location of system admin executables
-SBINDIR='${prefix}/bin'
-AC_ARG_WITH(sbindir, [ --with-sbindir=DIR system admin executables in
DIR (default ${prefix}/bin)], [SBINDIR="$withval"])
-AC_SUBST(SBINDIR)
-
-## location of program executables
-LIBEXECDIR='${prefix}/bin'
-AC_ARG_WITH(libexecdir, [ --with-libexecdir=DIR program executables in
DIR (default ${prefix}/bin)], [LIBEXECDIR="$withval"])
-AC_SUBST(LIBEXECDIR)
-
-## location of Perl modules
-LIBDIR='${prefix}/bin'
-AC_ARG_WITH(libdir, [ --with-libdir=DIR Perl modules in DIR (default
${prefix}/bin)], [LIBDIR="$withval"])
-AC_SUBST(LIBDIR)
-
-## location of default *read-only* data files
-DATADIR='${prefix}/bin/etc'
-AC_ARG_WITH(datadir, [ --with-datadir=DIR default *read-only* data
files in DIR (default ${prefix}/bin/etc)], [DATADIR="$withval"])
-AC_SUBST(DATADIR)
-
-## location of modifiable data files
-EXPLDIR='${prefix}/expl'
-AC_ARG_WITH(expldir, [ --with-expldir=DIR modifiable data files in DIR
(default ${prefix}/expl)], [EXPLDIR="$withval"])
-AC_SUBST(EXPLDIR)
-
-## location of documentation
-MANDIR='/usr/local/man'
-AC_ARG_WITH(mandir, [ --with-mandir=DIR documentation in DIR (default
/usr/local/man)], [MANDIR="$withval"])
-AC_SUBST(MANDIR)
-
-## SYS V init scripts directory
-INITDIR=/etc/rc.d/init.d
-AC_ARG_WITH(initdir, [ --with-initdir=DIR install System V init script
in DIR (default /etc/rc.d/init.d)], [INITDIR="$withval"])
-AC_SUBST(INITDIR)
-
-## Lock directory
-LOCKDIR=/var/lock/subsys
-AC_ARG_WITH(lockdir, [ --with-lockdir=DIR create lock files in DIR
(default /var/lock/subsys)], [LOCKDIR="$withval"])
-AC_SUBST(LOCKDIR)
-
-## directory for storing .pid files
-PIDDIR='${prefix}'
-AC_ARG_WITH(piddir, [ --with-piddir=DIR create .pid files in DIR
(default ${prefix})], [PIDDIR="$withval"])
-AC_SUBST(PIDDIR)
-
-## directory for Config directories populated by the user
-ETCDIR='${prefix}/etc'
-AC_ARG_WITH(etcdir, [ --with-etcdir=DIR Config directories populated by
the user are in DIR (default ${prefix}/etc)], [ETCDIR="$withval"])
-AC_SUBST(ETCDIR)
-
-## directory for language files
-LOCALEDIR='${prefix}/locale'
-AC_ARG_WITH(localedir, [ --with-localedir=DIR create language files in
DIR (default ${prefix}/locale)], [LOCALEDIR="$withval"])
-AC_SUBST(LOCALEDIR)
-
-## directory for Documentation files
-DOCDIR='${prefix}/doc'
-AC_ARG_WITH(docdir, [ --with-docdir=DIR create documentation files in
DIR (default ${prefix}/doc)], [DOCDIR="$withval"])
-AC_SUBST(DOCDIR)
-
-## directory for script files
-SCRIPTDIR='${prefix}/bin'
-AC_ARG_WITH(scriptdir, [ --with-scriptdir=DIR create script files in
DIR (default ${prefix}/bin)], [SCRIPTDIR="$withval"])
-AC_SUBST(SCRIPTDIR)
-
-## directory for sample files
-SAMPLEDIR='${prefix}/sample'
-AC_ARG_WITH(sampledir, [ --with-sampledir=DIR create sample files in
DIR (default ${prefix}/sample)], [SAMPLEDIR="$withval"])
-AC_SUBST(SAMPLEDIR)
-
-## directory for sample files
-SPOOLDIR='${prefix}/spool'
-AC_ARG_WITH(spooldir, [ --with-spooldir=DIR spool directory is DIR
(default ${prefix}/spool)], [SPOOLDIR="$withval"])
-AC_SUBST(SPOOLDIR)
-
## to run wwsympa.fcgi without setuidperl
AC_ARG_ENABLE(secure, [ --enable-secure install wwsympa to be run in a
secure mode, without suidperl (default disabled)])
AC_SUBST(enable_secure)
diff -Naur trunk-3/configure.ac~ trunk-4/configure.ac~
--- trunk-3/configure.ac~ 2008-03-03 21:01:31.000000000 +0100
+++ trunk-4/configure.ac~ 1970-01-01 01:00:00.000000000 +0100
@@ -1,192 +0,0 @@
-# configure.in - Top-level configure.in for Sympa
-# RCS Identication ; $Revision: 4592 $ ; $Date: 2007-09-11 17:34:07 +0200
(mar, 11 sep 2007) $
-#
-# Sympa - SYsteme de Multi-Postage Automatique
-# Copyright (c) 1997, 1998, 1999, 2000, 2001 Comite Reseau des Universites
-# Copyright (c) 1997,1998, 1999 Institut Pasteur & Christophe Wolfhugel
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-AC_PREREQ(2.59)
-AC_INIT(sympa, 5.3.4, address@concealed)
-AM_INIT_AUTOMAKE
-
-AC_PREFIX_DEFAULT(/home/sympa)
-
-## Directories setup
-## for main config files
-
-## location of main config files
-CONFDIR='/etc'
-AC_ARG_WITH(confdir, [ --with-confdir=DIR Sympa main configuration
files in DIR (default /etc)], [CONFDIR="$withval"])
-AC_SUBST(CONFDIR)
-
-## location of CGIs
-CGIDIR='${prefix}/bin'
-AC_ARG_WITH(cgidir, [ --with-cgidir=DIR CGIs in DIR (default
${prefix}/bin)], [CGIDIR="$withval"])
-AC_SUBST(CGIDIR)
-
-## location of user executables
-BINDIR='${prefix}/bin'
-AC_ARG_WITH(bindir, [ --with-bindir=DIR user executables in DIR
(default ${prefix}/bin). queue and bouncequeue programs will be installed in
this directory. If sendmail is configured to use smrsh (check the mailer prog
definition in your sendmail.cf), this should point to /etc/smrsh. This is
probably the case if you are using Linux], [BINDIR="$withval"])
-AC_SUBST(BINDIR)
-
-## location of system admin executables
-SBINDIR='${prefix}/bin'
-AC_ARG_WITH(sbindir, [ --with-sbindir=DIR system admin executables in
DIR (default ${prefix}/bin)], [SBINDIR="$withval"])
-AC_SUBST(SBINDIR)
-
-## location of program executables
-LIBEXECDIR='${prefix}/bin'
-AC_ARG_WITH(libexecdir, [ --with-libexecdir=DIR program executables in
DIR (default ${prefix}/bin)], [LIBEXECDIR="$withval"])
-AC_SUBST(LIBEXECDIR)
-
-## location of Perl modules
-LIBDIR='${prefix}/bin'
-AC_ARG_WITH(libdir, [ --with-libdir=DIR Perl modules in DIR (default
${prefix}/bin)], [LIBDIR="$withval"])
-AC_SUBST(LIBDIR)
-
-## location of default *read-only* data files
-DATADIR='${prefix}/bin/etc'
-AC_ARG_WITH(datadir, [ --with-datadir=DIR default *read-only* data
files in DIR (default ${prefix}/bin/etc)], [DATADIR="$withval"])
-AC_SUBST(DATADIR)
-
-## location of modifiable data files
-EXPLDIR='${prefix}/expl'
-AC_ARG_WITH(expldir, [ --with-expldir=DIR modifiable data files in DIR
(default ${prefix}/expl)], [EXPLDIR="$withval"])
-AC_SUBST(EXPLDIR)
-
-## location of documentation
-MANDIR='/usr/local/man'
-AC_ARG_WITH(mandir, [ --with-mandir=DIR documentation in DIR (default
/usr/local/man)], [MANDIR="$withval"])
-AC_SUBST(MANDIR)
-
-## SYS V init scripts directory
-INITDIR=/etc/rc.d/init.d
-AC_ARG_WITH(initdir, [ --with-initdir=DIR install System V init script
in DIR (default /etc/rc.d/init.d)], [INITDIR="$withval"])
-AC_SUBST(INITDIR)
-
-## Lock directory
-LOCKDIR=/var/lock/subsys
-AC_ARG_WITH(lockdir, [ --with-lockdir=DIR create lock files in DIR
(default /var/lock/subsys)], [LOCKDIR="$withval"])
-AC_SUBST(LOCKDIR)
-
-## directory for storing .pid files
-PIDDIR='${prefix}'
-AC_ARG_WITH(piddir, [ --with-piddir=DIR create .pid files in DIR
(default ${prefix})], [PIDDIR="$withval"])
-AC_SUBST(PIDDIR)
-
-## directory for Config directories populated by the user
-ETCDIR='${prefix}/etc'
-AC_ARG_WITH(etcdir, [ --with-etcdir=DIR Config directories populated by
the user are in DIR (default ${prefix}/etc)], [ETCDIR="$withval"])
-AC_SUBST(ETCDIR)
-
-## directory for language files
-LOCALEDIR='${prefix}/locale'
-AC_ARG_WITH(localedir, [ --with-localedir=DIR create language files in
DIR (default ${prefix}/locale)], [LOCALEDIR="$withval"])
-AC_SUBST(LOCALEDIR)
-
-## directory for Documentation files
-DOCDIR='${prefix}/doc'
-AC_ARG_WITH(docdir, [ --with-docdir=DIR create documentation files in
DIR (default ${prefix}/doc)], [DOCDIR="$withval"])
-AC_SUBST(DOCDIR)
-
-## directory for script files
-SCRIPTDIR='${prefix}/bin'
-AC_ARG_WITH(scriptdir, [ --with-scriptdir=DIR create script files in
DIR (default ${prefix}/bin)], [SCRIPTDIR="$withval"])
-AC_SUBST(SCRIPTDIR)
-
-## directory for sample files
-SAMPLEDIR='${prefix}/sample'
-AC_ARG_WITH(sampledir, [ --with-sampledir=DIR create sample files in
DIR (default ${prefix}/sample)], [SAMPLEDIR="$withval"])
-AC_SUBST(SAMPLEDIR)
-
-## directory for sample files
-SPOOLDIR='${prefix}/spool'
-AC_ARG_WITH(spooldir, [ --with-spooldir=DIR spool directory is DIR
(default ${prefix}/spool)], [SPOOLDIR="$withval"])
-AC_SUBST(SPOOLDIR)
-
-## to run wwsympa.fcgi without setuidperl
-AC_ARG_ENABLE(secure, [ --enable-secure install wwsympa to be run in a
secure mode, without suidperl (default disabled)])
-AC_SUBST(enable_secure)
-
-dnl Checks for programs.
-AC_PROG_CC
-AC_PROG_MAKE_SET
-AC_AIX
-
-AC_PATH_PROG(PERL, perl, /usr/bin/perl)
-AC_ARG_WITH(perl, [ --with-perl=FULLPATH set full path to Perl
interpreter (default /usr/bin/perl)], [PERL="$withval"])
-AC_SUBST(PERL)
-
-AC_PATH_PROG(SUIDPERL, suidperl, /usr/bin/suidperl)
-AC_SUBST(SUIDPERL)
-
-AC_PATH_PROG(SUDO, sudo, /usr/bin/sudo)
-AC_SUBST(SUDO)
-
-AC_PATH_PROG(MHONARC, mhonarc, /usr/bin/mhonarc)
-AC_ARG_WITH(mhonarc, [ --with-mhonarc=FULLPATH set full path to
MhOnArc mail archiving system (default /usr/bin/mhonarc)],
[MHONARC="$withval"])
-AC_SUBST(MHONARC)
-
-AC_PATH_PROG(OPENSSL, openssl, /usr/local/ssl/bin)
-AC_ARG_WITH(openssl, [ --with-openssl=FULLPATH set path to OpenSSL
(default /usr/local/ssl/bin/openssl)], [OPENSSL="$withval"])
-AC_SUBST(OPENSSL)
-
-AC_PATH_PROG(CVS2CL, cvs2cl.pl, /usr/local/bin)
-AC_SUBST(CVS2CL)
-
-AC_PATH_PROG(MSGFMT, msgfmt, /usr/bin/msgfmt)
-AC_SUBST(MSGFMT)
-
-AC_PATH_PROG(SH, sh, /bin/sh)
-
-USER=sympa
-AC_ARG_WITH(user, [ --with-user=LOGIN set sympa user name (default
sympa)], [USER="$withval"])
-AC_SUBST(USER)
-
-GROUP=sympa
-AC_ARG_WITH(group, [ --with-group=LOGIN set sympa group name (default
sympa)], [GROUP="$withval"])
-AC_SUBST(GROUP)
-
-SENDMAIL_ALIASES=/etc/mail/sympa_aliases
-AC_ARG_WITH(sendmail_aliases, [ --with-sendmail_aliases=ALIASFILE set
aliases file to be used by Sympa (default /etc/mail/sympa_aliases)],
[SENDMAIL_ALIASES="$withval"])
-AC_SUBST(SENDMAIL_ALIASES)
-
-VIRTUAL_ALIASES=/etc/mail/sympa_virtual
-AC_ARG_WITH(virtual_aliases, [ --with-virtual_aliases=ALIASFILE set
postfix virtual file to be used by Sympa (default /etc/mail/sympa_virtual)],
[VIRTUAL_ALIASES="$withval"])
-AC_SUBST(VIRTUAL_ALIASES)
-
-NEWALIASES=/usr/bin/newaliases
-AC_ARG_WITH(newaliases, [ --with-newaliases=FULLPATH set path to
newaliases command (default /usr/bin/newaliases)], [NEWALIASES="$withval"])
-AC_SUBST(NEWALIASES)
-
-NEWALIASES_ARG=
-AC_ARG_WITH(newaliases_arg, [ --with-newaliases_arg=ARGS set arguments
to newaliases command (default NONE)], [NEWALIASES_ARG="$withval"])
-AC_SUBST(NEWALIASES_ARG)
-
-POSTMAP=/usr/sbin/postmap
-AC_ARG_WITH(postmap, [ --with-postmap=FULLPATH set path to postfix
postmap command (default /usr/sbin/postmap)], [POSTMAP="$withval"])
-AC_SUBST(POSTMAP)
-
-POSTMAP_ARG=${VIRTUAL_ALIASES}
-AC_ARG_WITH(postmap_arg, [ --with-postmap_arg=ARGS set arguments to
postfix postmap command (default [same as virtual_aliases])],
[POSTMAP_ARG="$withval"])
-AC_SUBST(POSTMAP_ARG)
-
-dnl Initialize maintainer mode
-AM_MAINTAINER_MODE
-
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff -Naur trunk-3/Makefile.am trunk-4/Makefile.am
--- trunk-3/Makefile.am 2008-03-03 21:00:24.000000000 +0100
+++ trunk-4/Makefile.am 2008-03-03 21:48:42.000000000 +0100
@@ -29,7 +29,7 @@
GROUP = @GROUP@

## configuration file
-CONFDIR = @CONFDIR@
+CONFDIR = @sysconfdir@

## Perl path
PERL = @PERL@
@@ -48,44 +48,44 @@
## installed (usefull for packagers of Sympa)
DIR = ${prefix}

-EXPL_DIR = @EXPLDIR@
+EXPL_DIR = @localstatedir@/lib

## PID location
-PIDDIR = @PIDDIR@
+PIDDIR = @localstatedir@/run

## Both queue and bouncequeue are lunched by sendmail. If sendmail
## is configured to used smrsh (check the mailer prog definition), thoses
## files needs to be installed in /etc/smrsh.
-MAILERPROGDIR = @BINDIR@
+MAILERPROGDIR = @bindir@

RPMTOPDIR = `rpm --eval %_topdir`
#RPMTOPDIR = /usr/src/redhat

-MANDIR = @MANDIR@
+MANDIR = @mandir@

## SYSV init scripts directory
-INITDIR = @INITDIR@
+INITDIR = @sysconfdir@/rc.d/init.d

-BINDIR = @BINDIR@
+BINDIR = @bindir@

-SBINDIR = @SBINDIR@
+SBINDIR = @sbindir@

-CGIDIR = @CGIDIR@
+CGIDIR = @bindir@

-LIBDIR = @LIBDIR@
+LIBDIR = @pkgdatadir@/lib

-LOCALEDIR = @LOCALEDIR@
+LOCALEDIR = @localedir@

-DOCDIR = @DOCDIR@
+DOCDIR = @docdir@

-ETCDIR = @ETCDIR@
+ETCDIR = @sysconfdir@

-SCRIPTDIR = @SCRIPTDIR@
+SCRIPTDIR = @bindir@

-SAMPLEDIR = @SAMPLEDIR@
+SAMPLEDIR = @docdir@/sample

## Spools directory
-SPOOLDIR = @SPOOLDIR@
+SPOOLDIR = @localstatedir@/spool

## Directory for installing WWSympa
WWSBINDIR = $(BINDIR)
@@ -95,7 +95,7 @@
## Settings used in src/etc/scripts/sympa
PIDPRE = pidof -x
PIDPOST =
-LOCKDIR = @LOCKDIR@
+LOCKDIR = @localstatedir@/lock

## Path to newaliases command (or what else may be called to rebuild
## Mail aliases database)
@@ -150,7 +150,7 @@

CONFIG = $(CONFDIR)/sympa.conf
WWSCONFIG = $(CONFDIR)/wwsympa.conf
-ETCBINDIR = @DATADIR@
+ETCBINDIR = @datadir@

main_SRC = AUTHORS COPYING ChangeLog INSTALL KNOWNBUGS NEWS
README

diff -Naur trunk-4/configure.ac trunk-5/configure.ac
--- trunk-4/configure.ac 2008-03-03 21:48:36.000000000 +0100
+++ trunk-5/configure.ac 2008-03-03 21:50:20.000000000 +0100
@@ -23,8 +23,6 @@
AC_INIT(sympa, 5.4b1, address@concealed)
AM_INIT_AUTOMAKE

-AC_PREFIX_DEFAULT(/home/sympa)
-
## to run wwsympa.fcgi without setuidperl
AC_ARG_ENABLE(secure, [ --enable-secure install wwsympa to be run in a
secure mode, without suidperl (default disabled)])
AC_SUBST(enable_secure)
diff -Naur --exclude='*~' trunk-5/configure.ac trunk-6/configure.ac
--- trunk-5/configure.ac 2008-03-03 21:50:20.000000000 +0100
+++ trunk-6/configure.ac 2008-03-03 21:55:38.000000000 +0100
@@ -90,8 +90,5 @@
AC_ARG_WITH(postmap_arg, [ --with-postmap_arg=ARGS set arguments to
postfix postmap command (default [same as virtual_aliases])],
[POSTMAP_ARG="$withval"])
AC_SUBST(POSTMAP_ARG)

-dnl Initialize maintainer mode
-AM_MAINTAINER_MODE
-
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
diff -Naur --exclude='*~' trunk-6/configure.ac trunk-7/configure.ac
--- trunk-6/configure.ac 2008-03-03 21:55:38.000000000 +0100
+++ trunk-7/configure.ac 2008-03-03 21:57:30.000000000 +0100
@@ -56,8 +56,6 @@
AC_PATH_PROG(MSGFMT, msgfmt, /usr/bin/msgfmt)
AC_SUBST(MSGFMT)

-AC_PATH_PROG(SH, sh, /bin/sh)
-
USER=sympa
AC_ARG_WITH(user, [ --with-user=LOGIN set sympa user name (default
sympa)], [USER="$withval"])
AC_SUBST(USER)
diff -Naur --exclude='*~' trunk-6/Makefile.am trunk-7/Makefile.am
--- trunk-6/Makefile.am 2008-03-03 21:55:28.000000000 +0100
+++ trunk-7/Makefile.am 2008-03-03 21:57:24.000000000 +0100
@@ -129,7 +129,6 @@
OPENSSL = @OPENSSL@
SSLCERTDIR = $(EXPL_DIR)/X509-user-certs

-SH = @SH@
CC = @CC@
CFLAGS = -g

diff -Naur --exclude='*~' trunk-6/src/etc/script/sympa
trunk-7/src/etc/script/sympa
--- trunk-6/src/etc/script/sympa 2008-03-03 21:55:28.000000000 +0100
+++ trunk-7/src/etc/script/sympa 2008-03-03 21:57:07.000000000 +0100
@@ -1,4 +1,4 @@
-#! --SH--
+#!/bin/sh
#
# sympa Mailing Lists Management System
#
diff -Naur --exclude='*~' trunk-7/configure.ac trunk-8/configure.ac
--- trunk-7/configure.ac 2008-03-03 21:57:30.000000000 +0100
+++ trunk-8/configure.ac 2008-03-03 22:03:24.000000000 +0100
@@ -24,7 +24,10 @@
AM_INIT_AUTOMAKE

## to run wwsympa.fcgi without setuidperl
-AC_ARG_ENABLE(secure, [ --enable-secure install wwsympa to be run in a
secure mode, without suidperl (default disabled)])
+AC_ARG_ENABLE(
+ [secure],
+ [ --enable-secure install wwsympa to be run in a secure mode,
without suidperl (default disabled)]
+)
AC_SUBST(enable_secure)

dnl Checks for programs.
@@ -33,7 +36,11 @@
AC_AIX

AC_PATH_PROG(PERL, perl, /usr/bin/perl)
-AC_ARG_WITH(perl, [ --with-perl=FULLPATH set full path to Perl
interpreter (default /usr/bin/perl)], [PERL="$withval"])
+AC_ARG_WITH(
+ [perl],
+ [ --with-perl=FULLPATH set full path to Perl interpreter (default
/usr/bin/perl)],
+ [PERL="$withval"]
+)
AC_SUBST(PERL)

AC_PATH_PROG(SUIDPERL, suidperl, /usr/bin/suidperl)
@@ -43,11 +50,19 @@
AC_SUBST(SUDO)

AC_PATH_PROG(MHONARC, mhonarc, /usr/bin/mhonarc)
-AC_ARG_WITH(mhonarc, [ --with-mhonarc=FULLPATH set full path to
MhOnArc mail archiving system (default /usr/bin/mhonarc)],
[MHONARC="$withval"])
+AC_ARG_WITH(
+ [mhonarc],
+ [ --with-mhonarc=FULLPATH set full path to MhOnArc mail archiving
system (default /usr/bin/mhonarc)],
+ [MHONARC="$withval"]
+)
AC_SUBST(MHONARC)

AC_PATH_PROG(OPENSSL, openssl, /usr/local/ssl/bin)
-AC_ARG_WITH(openssl, [ --with-openssl=FULLPATH set path to OpenSSL
(default /usr/local/ssl/bin/openssl)], [OPENSSL="$withval"])
+AC_ARG_WITH(
+ [openssl],
+ [ --with-openssl=FULLPATH set path to OpenSSL (default
/usr/local/ssl/bin/openssl)],
+ [OPENSSL="$withval"]
+)
AC_SUBST(OPENSSL)

AC_PATH_PROG(CVS2CL, cvs2cl.pl, /usr/local/bin)
@@ -57,35 +72,67 @@
AC_SUBST(MSGFMT)

USER=sympa
-AC_ARG_WITH(user, [ --with-user=LOGIN set sympa user name (default
sympa)], [USER="$withval"])
+AC_ARG_WITH(
+ [user],
+ [ --with-user=LOGIN set sympa user name (default sympa)],
+ [USER="$withval"]
+)
AC_SUBST(USER)

GROUP=sympa
-AC_ARG_WITH(group, [ --with-group=LOGIN set sympa group name (default
sympa)], [GROUP="$withval"])
+AC_ARG_WITH(
+ [group],
+ [ --with-group=LOGIN set sympa group name (default sympa)],
+ [GROUP="$withval"]
+)
AC_SUBST(GROUP)

SENDMAIL_ALIASES=/etc/mail/sympa_aliases
-AC_ARG_WITH(sendmail_aliases, [ --with-sendmail_aliases=ALIASFILE set
aliases file to be used by Sympa (default /etc/mail/sympa_aliases)],
[SENDMAIL_ALIASES="$withval"])
+AC_ARG_WITH(
+ [sendmail_aliases],
+ [ --with-sendmail_aliases=ALIASFILE set aliases file to be used by
Sympa (default /etc/mail/sympa_aliases)],
+ [SENDMAIL_ALIASES="$withval"]
+)
AC_SUBST(SENDMAIL_ALIASES)

VIRTUAL_ALIASES=/etc/mail/sympa_virtual
-AC_ARG_WITH(virtual_aliases, [ --with-virtual_aliases=ALIASFILE set
postfix virtual file to be used by Sympa (default /etc/mail/sympa_virtual)],
[VIRTUAL_ALIASES="$withval"])
+AC_ARG_WITH(
+ [virtual_aliases],
+ [ --with-virtual_aliases=ALIASFILE set postfix virtual file to be
used by Sympa (default /etc/mail/sympa_virtual)],
+ [VIRTUAL_ALIASES="$withval"]
+)
AC_SUBST(VIRTUAL_ALIASES)

NEWALIASES=/usr/bin/newaliases
-AC_ARG_WITH(newaliases, [ --with-newaliases=FULLPATH set path to
newaliases command (default /usr/bin/newaliases)], [NEWALIASES="$withval"])
+AC_ARG_WITH(
+ [newaliases],
+ [ --with-newaliases=FULLPATH set path to newaliases command
(default /usr/bin/newaliases)],
+ [NEWALIASES="$withval"]
+)
AC_SUBST(NEWALIASES)

NEWALIASES_ARG=
-AC_ARG_WITH(newaliases_arg, [ --with-newaliases_arg=ARGS set arguments
to newaliases command (default NONE)], [NEWALIASES_ARG="$withval"])
+AC_ARG_WITH(
+ [newaliases_arg],
+ [ --with-newaliases_arg=ARGS set arguments to newaliases command
(default NONE)],
+ [NEWALIASES_ARG="$withval"]
+)
AC_SUBST(NEWALIASES_ARG)

POSTMAP=/usr/sbin/postmap
-AC_ARG_WITH(postmap, [ --with-postmap=FULLPATH set path to postfix
postmap command (default /usr/sbin/postmap)], [POSTMAP="$withval"])
+AC_ARG_WITH(
+ [postmap],
+ [ --with-postmap=FULLPATH set path to postfix postmap command
(default /usr/sbin/postmap)],
+ [POSTMAP="$withval"]
+)
AC_SUBST(POSTMAP)

POSTMAP_ARG=${VIRTUAL_ALIASES}
-AC_ARG_WITH(postmap_arg, [ --with-postmap_arg=ARGS set arguments to
postfix postmap command (default [same as virtual_aliases])],
[POSTMAP_ARG="$withval"])
+AC_ARG_WITH(
+ [postmap_arg],
+ [ --with-postmap_arg=ARGS set arguments to postfix postmap command
(default [same as virtual_aliases])],
+ [POSTMAP_ARG="$withval"]
+)
AC_SUBST(POSTMAP_ARG)

AC_CONFIG_FILES([Makefile])
diff -Naur --exclude='*~' trunk-7/.configure.ac.swp trunk-8/.configure.ac.swp
--- trunk-7/.configure.ac.swp 1970-01-01 01:00:00.000000000 +0100
+++ trunk-8/.configure.ac.swp 2008-03-03 22:03:31.000000000 +0100
@@ -0,0 +1,14 @@
+b0VIM
7.1gÌGò}^1guillaumeoberkampf.msr-inria.inria.fr~guillaume/sympa/trunk-8/configure.acutf-8
3210#"!
Utp\^|adù
\Înl=òª¨aÖ
°
®
l
+
ë¼ºv8ëêÚ¨l]Oã
+á
+É
+È
+¯
+¤
+
+
+
+c
+V
+J
+ì Ö Ô Å Ä } | T E
D ÷mkYX%
©|{K:9
úùîáÕzxih\OBýæäÔÓª
pïíÒÑ©
+éçÍÌ +
ø÷çÚÆkKI0/AC_ARG_WITH(POSTMAP=/usr/sbin/postmapAC_SUBST(NEWALIASES_ARG))
[NEWALIASES_ARG="$withval"] [ --with-newaliases_arg=ARGS set
arguments to newaliases command (default NONE)],
newaliases_arg,AC_ARG_WITH(NEWALIASES_ARG=AC_SUBST(NEWALIASES))
[NEWALIASES="$withval"] [ --with-newaliases=FULLPATH set path to
newaliases command (default /usr/bin/newaliases)],
newaliases,AC_ARG_WITH(NEWALIASES=/usr/bin/newaliasesAC_SUBST(VIRTUAL_ALIASES))
[VIRTUAL_ALIASES="$withval"] [ --with-virtual_aliases=ALIASFILE
set postfix virtual file to be used by Sympa (default
/etc/mail/sympa_virtual)],
virtual_aliases,AC_ARG_WITH(VIRTUAL_ALIASES=/etc/mail/sympa_virtualAC_SUBST(SENDMAIL_ALIASES))
[SENDMAIL_ALIASES="$withval"] [ --with-sendmail_aliases=ALIASFILE
set aliases file to be used by Sympa (default /etc [sendmail_aliases
[sendmail_aliases],AC_ARG_WITH(SENDMAIL_ALIASES=/etc/mail/sympa_aliasesAC_SUBST(GROUP))
[GROUP="$withval"] [ --with-group=LOGIN set sympa group name
(default sympa)], [group],AC_ARG_WITH(GROUP=sympaAC_SUBST(USER))
[USER="$withval"] [ --with-user=LOGIN set sympa user name (default
sympa)],
[user],AC_ARG_WITH(USER=sympaAC_SUBST(MSGFMT)AC_PATH_PROG(MSGFMT,
msgfmt, /usr/bin/msgfmt)AC_SUBST(CVS2CL)AC_PATH_PROG(CVS2CL, cvs2cl.pl,
/usr/local/bin)AC_SUBST(OPENSSL)) [OPENSSL="$withval"] [
--with-openssl=FULLPATH set path to OpenSSL (default
/usr/local/ssl/bin/openssl)],
[openssl],AC_ARG_WITH(AC_PATH_PROG(OPENSSL, openssl,
/usr/local/ssl/bin)AC_SUBST(MHONARC)) [MHONARC="$withval"] [
--with-mhonarc=FULLPATH set full path to MhOnArc mail archiving system
(default /usr/bin/mhonarc)],
[mhonarc],AC_ARG_WITH(AC_PATH_PROG(MHONARC, mhonarc,
/usr/bin/mhonarc)AC_SUBST(SUDO)AC_PATH_PROG(SUDO, sudo,
/usr/bin/sudo)AC_SUBST(SUIDPERL)AC_PATH_PROG(SUIDPERL, suidperl,
/usr/bin/suidperl)AC_SUBST(PERL)) [PERL="$withval"] [
--with-perl=FULLPATH set full path to Perl interpreter (default
/usr/bin/perl)], [perl],AC_ARG_WITH(AC_PATH_PROG(PERL, perl,
/usr/bin/perl)AC_AIXAC_PROG_MAKE_SETAC_PROG_CCdnl Checks for
programs.AC_SUBST(enable_secure)) [ --enable-secure install
wwsympa to be run in a secure mode, without suidperl (default disabled)]
[secure],AC_ARG_ENABLE(## to run wwsympa.fcgi without
setuidperlAM_INIT_AUTOMAKEAC_INIT(sympa, 5.4b1,
address@concealed)AC_PREREQ(2.59)# Foundation, Inc., 59 Temple
Place - Suite 330, Boston, MA 02111-1307, USA.# along with this program; if
not, write to the Free Software# You should have received a copy of the GNU
General Public License## GNU General Public License for more details.#
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the# but WITHOUT
ANY WARRANTY; without even the implied warranty of# This program is
distributed in the hope that it will be useful,## (at your option) any
later version.# the Free Software Foundation; either version 2 of the
License, or# it under the terms of the GNU General Public License as
published by# This program is free software; you can redistribute it and/or
modify## Copyright (c) 1997,1998, 1999 Institut Pasteur & Christophe
Wolfhugel# Copyright (c) 1997, 1998, 1999, 2000, 2001 Comite Reseau des
Universites# Sympa - SYsteme de Multi-Postage Automatique## RCS
Identication ; $Revision: 4592 $ ; $Date: 2007-09-11 17:34:07 +0200 (mar, 11
sep 2007) $ # configure.in - Top-level configure.in for Sympaadõ
Qñsq_^?2xw[QTAC_OUTPUTAC_CONFIG_FILES([Makefile])AC_SUBST(POSTMAP_ARG))
[POSTMAP_ARG="$withval"] [ --with-postmap_arg=ARGS set arguments
to postfix postmap command (default [same as virtual_aliases])],
[postmap_arg],AC_ARG_WITH(POSTMAP_ARG=${VIRTUAL_ALIASES}AC_SUBST(POSTMAP))
[POSTMAP="$withval"] [ --with-postmap=FULLPATH set path to
postfix postmap command (default /usr/sbin/postmap)], [postmap],adã
{
hfKJ"þ`^DC$

m
l
\
O
9
Þ¾¼£¢{
AC_ARG_WITH(POSTMAP=/usr/sbin/postmapAC_SUBST(NEWALIASES_ARG))
[NEWALIASES_ARG="$withval"] [ --with-newaliases_arg=ARGS set
arguments to newaliases command (default NONE)],
[newaliases_arg],AC_ARG_WITH(NEWALIASES_ARG=AC_SUBST(NEWALIASES))
[NEWALIASES="$withval"] [ --with-newaliases=FULLPATH set path to
newaliases command (default /usr/bin/newaliases)],
[newaliases],AC_ARG_WITH(NEWALIASES=/usr/bin/newaliasesAC_SUBST(VIRTUAL_ALIASES))
[VIRTUAL_ALIASES="$withval"] [ --with-virtual_aliases=ALIASFILE
set postfix virtual file to be used by Sympa (default
/etc/mail/sympa_virtual)],
[virtual_aliases],AC_ARG_WITH(VIRTUAL_ALIASES=/etc/mail/sympa_virtualAC_SUBST(SENDMAIL_ALIASES))
[SENDMAIL_ALIASES="$withval"] [ --with-sendmail_aliases=ALIASFILE
set aliases file to be used by Sympa (default /etc/mail/sympa_aliases)],
\ Pas de fin de ligne Ã la fin du fichier.
diff -Naur --exclude='*~' trunk-8/configure.ac trunk-9/configure.ac
--- trunk-8/configure.ac 2008-03-03 22:03:24.000000000 +0100
+++ trunk-9/configure.ac 2008-03-03 22:07:31.000000000 +0100
@@ -26,7 +26,10 @@
## to run wwsympa.fcgi without setuidperl
AC_ARG_ENABLE(
[secure],
- [ --enable-secure install wwsympa to be run in a secure mode,
without suidperl (default disabled)]
+ AC_HELP_STRING(
+ [--enable-secure],
+ [install wwsympa to be run in a secure mode, without suidperl
(default disabled)]
+ )
)
AC_SUBST(enable_secure)

@@ -38,7 +41,10 @@
AC_PATH_PROG(PERL, perl, /usr/bin/perl)
AC_ARG_WITH(
[perl],
- [ --with-perl=FULLPATH set full path to Perl interpreter (default
/usr/bin/perl)],
+ AC_HELP_STRING(
+ [--with-perl=FULLPATH],
+ [set full path to Perl interpreter (default /usr/bin/perl)]
+ ),
[PERL="$withval"]
)
AC_SUBST(PERL)
@@ -52,7 +58,10 @@
AC_PATH_PROG(MHONARC, mhonarc, /usr/bin/mhonarc)
AC_ARG_WITH(
[mhonarc],
- [ --with-mhonarc=FULLPATH set full path to MhOnArc mail archiving
system (default /usr/bin/mhonarc)],
+ AC_HELP_STRING(
+ [--with-mhonarc=FULLPATH],
+ [set full path to MhOnArc mail archiving system (default
/usr/bin/mhonarc)]
+ ),
[MHONARC="$withval"]
)
AC_SUBST(MHONARC)
@@ -60,7 +69,10 @@
AC_PATH_PROG(OPENSSL, openssl, /usr/local/ssl/bin)
AC_ARG_WITH(
[openssl],
- [ --with-openssl=FULLPATH set path to OpenSSL (default
/usr/local/ssl/bin/openssl)],
+ AC_HELP_STRING(
+ [--with-openssl=FULLPATH],
+ [set path to OpenSSL (default /usr/local/ssl/bin/openssl)]
+ ),
[OPENSSL="$withval"]
)
AC_SUBST(OPENSSL)
@@ -74,7 +86,10 @@
USER=sympa
AC_ARG_WITH(
[user],
- [ --with-user=LOGIN set sympa user name (default sympa)],
+ AC_HELP_STRING(
+ [--with-user=LOGIN],
+ [set sympa user name (default sympa)]
+ ),
[USER="$withval"]
)
AC_SUBST(USER)
@@ -82,7 +97,10 @@
GROUP=sympa
AC_ARG_WITH(
[group],
- [ --with-group=LOGIN set sympa group name (default sympa)],
+ AC_HELP_STRING(
+ [--with-group=LOGIN],
+ [set sympa group name (default sympa)]
+ ),
[GROUP="$withval"]
)
AC_SUBST(GROUP)
@@ -90,7 +108,10 @@
SENDMAIL_ALIASES=/etc/mail/sympa_aliases
AC_ARG_WITH(
[sendmail_aliases],
- [ --with-sendmail_aliases=ALIASFILE set aliases file to be used by
Sympa (default /etc/mail/sympa_aliases)],
+ AC_HELP_STRING(
+ [--with-sendmail_aliases=ALIASFILE],
+ [set aliases file to be used by Sympa (default
/etc/mail/sympa_aliases)]
+ ),
[SENDMAIL_ALIASES="$withval"]
)
AC_SUBST(SENDMAIL_ALIASES)
@@ -98,7 +119,10 @@
VIRTUAL_ALIASES=/etc/mail/sympa_virtual
AC_ARG_WITH(
[virtual_aliases],
- [ --with-virtual_aliases=ALIASFILE set postfix virtual file to be
used by Sympa (default /etc/mail/sympa_virtual)],
+ AC_HELP_STRING(
+ [--with-virtual_aliases=ALIASFILE],
+ [ set postfix virtual file to be used by Sympa (default
/etc/mail/sympa_virtual)]
+ ),
[VIRTUAL_ALIASES="$withval"]
)
AC_SUBST(VIRTUAL_ALIASES)
@@ -106,7 +130,10 @@
NEWALIASES=/usr/bin/newaliases
AC_ARG_WITH(
[newaliases],
- [ --with-newaliases=FULLPATH set path to newaliases command
(default /usr/bin/newaliases)],
+ AC_HELP_STRING(
+ [--with-newaliases=FULLPATH],
+ [set path to newaliases command (default /usr/bin/newaliases)]
+ ),
[NEWALIASES="$withval"]
)
AC_SUBST(NEWALIASES)
@@ -114,7 +141,10 @@
NEWALIASES_ARG=
AC_ARG_WITH(
[newaliases_arg],
- [ --with-newaliases_arg=ARGS set arguments to newaliases command
(default NONE)],
+ AC_HELP_STRING(
+ [--with-newaliases_arg=ARGS],
+ [set arguments to newaliases command (default NONE)]
+ ),
[NEWALIASES_ARG="$withval"]
)
AC_SUBST(NEWALIASES_ARG)
@@ -122,7 +152,10 @@
POSTMAP=/usr/sbin/postmap
AC_ARG_WITH(
[postmap],
- [ --with-postmap=FULLPATH set path to postfix postmap command
(default /usr/sbin/postmap)],
+ AC_HELP_STRING(
+ [--with-postmap=FULLPATH],
+ [set path to postfix postmap command (default /usr/sbin/postmap)]
+ ),
[POSTMAP="$withval"]
)
AC_SUBST(POSTMAP)
@@ -130,7 +163,10 @@
POSTMAP_ARG=${VIRTUAL_ALIASES}
AC_ARG_WITH(
[postmap_arg],
- [ --with-postmap_arg=ARGS set arguments to postfix postmap command
(default [same as virtual_aliases])],
+ AC_HELP_STRING(
+ [--with-postmap_arg=ARGS],
+ [set arguments to postfix postmap command (default [same as
virtual_aliases])]
+ ),
[POSTMAP_ARG="$withval"]
)
AC_SUBST(POSTMAP_ARG)

Re: [sympa-dev] Autotools cleanup, Guillaume Rousse, 03/03/2008
- Re: [sympa-dev] Autotools cleanup, David Verdin, 03/04/2008
- <Possible follow-up(s)>
- Re: [sympa-dev] Autotools cleanup, Olivier Salaün, 03/14/2008
  - Re: [sympa-dev] Autotools cleanup, Guillaume Rousse, 03/17/2008
    - Re: [sympa-dev] Autotools cleanup, Guillaume Rousse, 03/17/2008

List archive

Re: [sympa-dev] Autotools cleanup