The mailing list for listmasters using Sympa

[Alan Hicks <address@concealed>]

Steffen Lindner wrote:
> Hi Alan,
>
> thx for the help, i insert it into my exim config. But problem still
> exists :(
>
> Can you pls send me your sympa config (sympa.conf / wwsympa.conf) and a
> robot.conf from a virtual host. So i can check my config, maybe there is
> something wrong.
>
> Thanks in advance
> Steffen Lindner
What does does your testing show with exim -bt
> Am Montag, den 07.05.2007, 12:50 +0100 schrieb Alan Hicks:
> > Steffen Lindner wrote:
> > > Hi list,
> > >
> > > the last days i installed sympa on my server. I use exim as mailserver
> > > and i changed 
> > > the exim config as described in http://www.sympa.org/wiki/faq/exim. The
> > > installation for the main domain works like it should.
> > >
> > > So i started to get Sympa working on my virtual hosts. I used this
> > > tutorial: http://www.sympa.org/wiki/manual/virtual-hosts?s=exim.
> > > The wws works on the virtual hosts, i can create mailinglists but i cant
> > > send mails to them, they get rejected "550 unknown
> > > user (in reply to RCPT TO command)". I found out that
> > > in /etc/mail/sympa.aliases the entry for the virtual host is different 
> > > from the entry for the main Domain (which works). So i changed:
> > >
> > > #------------------------------ ddd: list alias created 05 May
> > > 2007                                                                                           
> > > zock-o-rama.de-ddd: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                                           
> > > zock-o-rama.de-ddd-request: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                           
> > > zock-o-rama.de-ddd-editor: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                             
> > > #zock-o-rama.de-ddd-subscribe: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                      
> > > zock-o-rama.de-ddd-unsubscribe: "| /usr/lib/sympa/bin/queue
> > > address@concealed"
> > > │                       
> > > zock-o-rama.de-ddd-owner: "| /usr/lib/sympa/bin/bouncequeue
> > > address@concealed"
> > >
> > > to:
> > >
> > > #------------------------------ ddd: list alias created 05 May
> > > 2007                                                                                           
> > > ddd: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                                           
> > > ddd-request: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                           
> > > ddd-editor: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                             
> > > #ddd-subscribe: "| /usr/lib/sympa/bin/queue
> > > address@concealed"                                                                      
> > > ddd-unsubscribe: "| /usr/lib/sympa/bin/queue
> > > address@concealed"
> > > │                       
> > > ddd-owner: "| /usr/lib/sympa/bin/bouncequeue address@concealed"
> > >
> > > Now i can send Mails to the list and they get bounced correct. But i
> > > cant use the 
> > > mailinglist commands like address@concealed ...
> > >
> > > Does someone have a idea what i it can be? And why sympa created a wrong
> > > alias? Or is it a configuration error?
> > >
> > > Thanks in advance
> > >
> > > Steffen Lindner
> > Hi Steffen,
> >
> > I'm running various lists using exim and sympa and have found that 
> > putting the following sympa aliases into the exim config routers and 
> > transports automates the whole process.  Hope this helps,
> > Alan
> >
> > #Routers
> > # Sympa list aliases
> > sympa_list_command:
> >    driver = accept
> >    condition        = ${if eqi{$local_part}{sympa}{1}{0}}
> >    require_files = +/usr/local/etc/sympa/${lc::$domain}/robot.conf
> >    retry_use_local_part
> >    transport = sympa_bounce
> >
> > list:
> >    driver = accept
> >    require_files = 
> > +/usr/local/sympa/expl/${lc::$domain}/${local_part}/config
> >    retry_use_local_part
> >    transport = sympa_list
> >
> > listrequest:
> >    driver = accept
> >    local_part_suffix = -request
> >    require_files = 
> > +/usr/local/sympa/expl/${lc::$domain}/${local_part}/config
> >    retry_use_local_part
> >    transport = sympa_request
> >
> > listeditor:
> >    driver = accept
> >    local_part_suffix = -editor
> >    require_files = 
> > +/usr/local/sympa/expl/${lc::$domain}/${local_part}/config
> >    retry_use_local_part
> >    transport = sympa_editor
> >
> > listsubscribe:
> >    driver = accept
> >    local_part_suffix = -subscribe
> >    require_files = 
> > +/usr/local/sympa/expl/${lc::$domain}/${local_part}/config
> >    retry_use_local_part
> >    transport = sympa_subscribe
> >
> > listunsubscribe:
> >    driver = accept
> >    local_part_suffix = -unsubscribe
> >    require_files = 
> > +/usr/local/sympa/expl/${lc::$domain}/${local_part}/config
> >    retry_use_local_part
> >    transport = sympa_unsubscribe
> >
> > listowner:
> >    driver = accept
> >    local_part_suffix = -owner
> >    require_files = 
> > +/usr/local/sympa/expl/${lc::$domain}/${local_part}/config
> >    retry_use_local_part
> >    transport = sympa_owner
> >
> > listbounce:
> >    driver = accept
> >    local_part_prefix = bounce
> >    require_files = +/usr/local/etc/sympa/${lc::$domain}/robot.conf
> >    retry_use_local_part
> >    transport = sympa_bounce
> >
> >
> > #Transports
> > sympa_command:
> >    driver = pipe
> >    command = "/usr/local/bin/queue sympa\@$domain"
> >    return_fail_output
> >    user = sympa
> >
> > sympa_list:
> >    driver = pipe
> >    command = "/usr/local/bin/queue ${local_part}\@$domain"
> >    return_fail_output
> >    user = sympa
> >
> > sympa_request:
> >    driver = pipe
> >    command = "/usr/local/bin/queue ${local_part}-request\@$domain"
> >    return_fail_output
> >    user = sympa
> >
> > sympa_subscribe:
> >    driver = pipe
> >    command = "/usr/local/bin/queue ${local_part}-subscribe\@$domain"
> >    return_fail_output
> >    user = sympa
> >
> > sympa_unsubscribe:
> >    driver = pipe
> >    command = "/usr/local/bin/queue ${local_part}-unsubscribe\@$domain"
> >    return_fail_output
> >    user = sympa
> >
> > sympa_editor:
> >    driver = pipe
> >    command = "/usr/local/bin/queue ${local_part}-editor\@$domain"
> >    return_fail_output
> >    user = sympa
> >
> > # This transport is used for processing bounces
> > sympa_owner:
> >    driver = pipe
> >    command = "/usr/local/bin/bouncequeue ${local_part}\@$domain"
> >    return_fail_output
> >    user = sympa
> >
> > sympa_bounce:
> >    driver = pipe
> >    command = "/usr/local/bin/bouncequeue ${local_part}\@$domain"
> >    return_fail_output
> >    user = sympa