The mailing list for listmasters using Sympa

["Goltz, Immo" <address@concealed>]

Hello Racke,

robot.conf contains just some lines.

listmaster address@concealed
title TEST Mailing  TEST
logo_html_definition <a...>
wwsympa_url     https://new.example.com/sympa
soap_url        https://new.example.com/sympasoap11

I had expected to get log on console when running the cli. There still is the 
sympa.log and also the messages log (both in /var/log/) contains entries. 
Tried to tail them and run sympa move again.
Both have
May 19 16:10:21 symapserver sympa[513147]: err main::#39 > Sympa::CLI::run#70 
> Sympa::CLI::run#180 > Sympa::CLI::move::_run#46 > Conf::valid_robot#782 
Robot new.example.com undefined; no /var/lib/sympa/list_data/new.example.com 
directory

Well, this directory I did not create. Only /etc/sympa/new.example.com
But if I remember correctly inside  /var/lib/sympa/list_data/ I never created 
the vhost.


________________________________________
Von: Stefan Hornburg (Racke) <address@concealed>
Gesendet: Donnerstag, 19. Mai 2022 14:17
An: Goltz, Immo; address@concealed
Betreff: [EXTERN] Re: AW: [EXTERN] Re: [sympa-users] creating new robot/vhost 
issue

On 19/05/2022 13:51, Goltz, Immo wrote:
> Hello Racke,
>
> no, this does not fix this problem.
>
> Still get
> sympa  move -d --log_level=3 ...
> Unknown robot ...
> Even with debug no more output.

Hello Immo,

can you show the contents of your robot.conf?

Which log are you looking at? I noticed that on my setup the logs from the 
CLI actions ends up
in the syslog instead of sympa.log.

Regards
         Racke

>
>
> Mit freundlichen Grüßen
>
> Immo Goltz
>
> IT-Systemmanager / Bereich 71 Informationstechnik
> Goethe-Institut Zentrale
> Oskar-von-Miller-Ring 18
> 80333 München
> Deutschland
> Tel.: +49 89 15921 642
> Email: address@concealed
> Homepage: www.goethe.de
>
>
> ________________________________________
> Von: address@concealed 
> <address@concealed> im Auftrag von Stefan Hornburg 
> (Racke) <address@concealed>
> Gesendet: Mittwoch, 18. Mai 2022 07:14
> An: address@concealed
> Betreff: [EXTERN] Re: [sympa-users] creating new robot/vhost issue
>
> On 17/05/2022 14:11, Goltz, Immo wrote:
>> Dear list,
>>
>> I am quite sure creating a robot worked this way (last done some months 
>> ago):
>>
>> 1. create robot domain say newsletter.example.com in /etc/sympa
>> 2. inside create file robot.conf with listmaster, title, wwsympa_url 
>> entries
>> 3. restart sympa, wwsympa
>>
>> Now on 6.2.68 this does not work.
>>
>> After steps 1-3 I tried to:
>> sympa move --mode=copy address@concealed address@concealed
>> which gave error:
>> Unknown robot "newsletter.example.com"
>
> Hello Immo,
>
> the new commandline interface introduced with 6.2.68 is in fact buggy. 
> Please check if https://github.com/sympa-community/sympa/pull/1344 fixes 
> your problem.
>
> Regards
>             Racke
>
>>
>> Then pointed browser to https://newsletter.example.com/sympa/ which worked 
>> fine! Tried to create an account which gave no error in the gui and log:
>> May 17 13:32:03 sympa-server wwsympa[359166]: info 
>> main::do_requestpasswd(address@concealed) [robot newsletter.example.com] 
>> [session 45672154794598] [client IP]
>>
>> May 17 13:32:03 sympa-server wwsympa[359166]: notice 
>> Sympa::Spindle::ProcessTemplate::_twist() Processing 
>> Sympa::Message::Template 
>> <address@concealed,793>; 
>> address@concealed; 
>> address@concealed; 
>> address@concealed; address@concealed; 
>> template=sendpasswd; action=requestpasswd; reason=firstpasswd
>> May 17 13:32:03 sympa-server wwsympa[359166]: notice 
>> Sympa::Spool::Outgoing::store() Message Sympa::Message::Template 
>> <address@concealed,793> is stored into bulk 
>> spool as 
>> <address@concealed,359166,8230>
>>
>> But the mail never left sympa instead ended up in 
>> /var/spool/sympa/bulk/bad/msg . No entry (even with debug3) in sympa log.
>> Fetching the password set link from the "bad" message I was able to create 
>> the account, login and create a new list. Once this was done sympa move 
>> worked, creating accounts worked (password mail was sent).
>>
>> Is this a regression in Sympa 6.2.28 or did I forget something needed 
>> beyond steps 1-3?
>>
>> Thank you in advance,
>> Immo
>>
>
>
> --
> Automation expert - Ansible and friends
> Linux administrator & Debian maintainer
> Perl Dancer & conference hopper
>
>


--
Automation expert - Ansible and friends
Linux administrator & Debian maintainer
Perl Dancer & conference hopper